General informations
Specifications
Alternative Products

Check availability

Specifications

-

-



Units
See less

If you have seen this product, it may interest you

  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
    106.5 in
    Overall Height
    30.9 in
    Overall Width
    74.8 in
  • 3.05 m (10 ft) - Snow Pushes
    Weight
    4111.6 lb
    Overall Height
    38.4 in
    Working Width
    120 in
  • 793D - Off-Highway Trucks
    Gross Power - SAE J1995
    2415 HP

    -
    Top Speed - Loaded
    33.7 mile/h
  • MP345 Shear Jaw - Multi-Processors
    Length
    73.4 in
    Height
    39.6 in
    Width
    90.4 in
  • 610 mm (24 in) - Buckets - Excavator
    Rated Capacity
    8.1 yd³
    Width
    24 in
    Weight
    427.7 lb
  • MX350 Controller - Electric Power
    Rating Range
    Switch Dependent
    Transfer Type
    Application Dependent
    Switch Type
    Application Dependent
  • GSH425 4-Tine, 1150-Liter Orange Peel Grapple - Grapples
    Capacity
    1.5 yd³
    Operating Weight
    3666 lb
  • R1300G - Underground - Hard Rock
    Gross Power - SAE J1995
    165 HP
    Loaded
    60682 lb
    Nominal Payload Capacity
    14991 lb
  • CP68B - Compactors
    Gross Power
    156.9 HP
    Operating Weight - With ROPS/FOPS
    32529 lb
    Compaction Width
    84 in
  • 23.8 m³ (30.8 yd³ ) - Blades
    Capacity
    30.8 yd³
    Width
    193 in
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
    15.5 ft³
    Width
    36 in
    Weight
    703.3 lb
  • 816K - Compactors
    Gross Power
    284 HP
    Operating Weight
    56899 lb
  • 4585mm (180in) Mat'l handing Arm, Fusion™ - Material Handling
    Maximum Load Rating
    19000 lb
    Retracted Length
    120 in
    Extended Length
    187 in
  • 74.93 m³ (98.0 yd³) - Blades
    Capacity
    98 yd³
    Width
    322 in
  • 1883 mm (74 in) - Buckets - Skid Steer Loader
    Capacity
    0.63 yd³
    Width
    74.1 in
    Weight
    842.2 lb
  • C0.7 - Industrial
    Maximum Power
    17.8 HP
    Rated Speed
    2200-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    156.6 lb
  • 259D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    74.3 HP
    Operating Weight
    8987 lb
  • 1.5 m3 (2.0 yd3), Pin On, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
    2.2 yd³
    Width
    95.6 in
    Weight
    1270.1 lb
  • 800 mm (32 in) - Buckets - Excavator
    Capacity
    79.3 l
    Width
    31.5 in
    Weight
    179.5 lb
  • M 25 E - Marine Power Systems
    Maximum Rating
    3024 kWe (3938 kVA)
    Minimum Rating
    2016 kWe (2625 kVA)
  • T112 Manual Side Shift - Trenchers
    Overall Length
    106.5 in
    Overall Height
    30.9 in
    Overall Width
    74.8 in
  • C280 - Marine Power Systems
    Maximum Rating
    7268 BHP
    Minimum Rating
    2320 BHP
    Aspiration
    TA
  • 1829 mm (72 in) - Blades
    Overall Width
    74.5 in
    Weight
    690 lb
  • 320 - Excavators
    Engine Power - ISO 9249
    172 HP
    Operating Weight
    50265 lb
  • MH3024F - Material Handlers
    Maximum Net Power - SAE J1349/ISO 9249
    126 kW (169 hp [171 hp/PS*])
    Operating Weight
    22 950-24 165 kg (50,596-53,242 lb)
    Maximum Reach
    33.92 ft
  • 3941 mm (155 in) - Material Handling
    Maximum Load Rating
    4618.7 lb
    Retracted Length
    79 in
    Extended Length
    155 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
    410.1 lb
    Overall Height
    16 in
    Working Width
    144 in
  • 15m³ (19.6yd³) Heavy Rock - Buckets - Mining Shovels

    -

    -
  • 910M - Wheel Loaders
    Net Power
    97 HP
    Operating Weight
    17893 lb
    Bucket Capacities
    1.3-1.9 m3 (1.7-2.5 yd3)
  • 639 mm (25 in) - Rippers
    Overall Length
    32.8 in
    Weight
    240.3 lb
    Width
    16.5 in
  • AD22 - Underground - Hard Rock
    Gross Power - SAE J1995
    325 HP
    Loaded
    97488 lb
    Nominal Payload Capacity
    48501 lb
  • 16 - Motor Graders
    Base Power (1st Gear) - Net
    290 HP
    Operating Weight - Typically Equipped
    71454 lb
    Blade Width
    16 ft
  • 299D3 XE - Skid Steer Loaders
    Gross Power - SAE J1995
    110 HP
    Operating Weight
    11756 lb
  • 1524 mm (60 in), Pin On - Buckets - Backhoe Rear
    Capacity
    16.7 ft³
    Width
    60 in
    Weight
    529.1 lb
  • Pin Grabber Coupler (315-Linkage): 455-3916 - Couplers - Excavator
    Weight
    659 lb
    Width - Machine Interface
    18.11 in
    Lifting Eye Working Load Limit
    22046 lb
  • GSV520 GC 5-Tine, 500-Liter Orange Peel Grapple - Grapples
    Capacity
    0.65 yd³
    Operating Weight
    2586 lb
  • S2090 Straight Scrap & Demolition Shear - Shears
    Length
    170 in
    Height
    74 in
    Width
    30 in
  • 304E2 CR - Excavators
    Gross Power - ISO 14396
    41.8 HP
    Operating Weight
    8996 lb
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
    4.5 yd³
    Width
    106 in
    Weight
    2392 lb
  • CVP110 - Compactors
    Impulse Force
    24669 lb
    Cycles/Minimum
    2200
    Base Plate Width
    34 in
  • G3512E - Electric Power
    Fuel Type
    Natural Gas
    Frequency
    50 Hz
  • 1140 mm (45 in) - Bale Spears
    Overall Width
    55.4 in
    Overall Height
    51.8 in
    Capacity
    3007.1 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
    1803.4 lb
    Overall Height
    38.4 in
    Working Width
    120 in
  • 3516 (50 Hz) - Electric Power
    Minimum Rating
    1600 kVA
    Maximum Rating
    2000 kVA
    Emissions/Fuel Strategy
    Low Fuel Consumption
  • C27 and C32 Sound Attenuated Enclosure - Generator Set Enclosures

    -

    -
  • C13, C15, C18 SA enclosure. 350-600 kW 60 Hz - Generator Set Enclosures

    -

    -
  • DE50 GC (50 Hz) - Electric Power
    Minimum Rating
    50.0 kVA
    Maximum Rating
    50.0 kVA
    Emissions/Fuel Strategy
    Non Regulated
  • 301.4C - Excavators
    Gross Power
    24.3 HP
    Operating Weight
    3241 lb
  • 301.5 - Excavators
    Gross Power - ISO 14396
    21.6 HP
    Operating Weight
    3913 lb
  • 730 EJ - Articulated Trucks
    Gross Power - SAE J1995
    375 HP
    Rated Payload
    30 ton (US)
    Heaped (SAE 2:1)
    22.1 yd³
  • H140 S - Hammers
    Impact Energy Class
    6000 ft·lbf
    Blows per Minute
    325-540
    Maximum Operating Weight
    5865 lb
  • DG60-2 (3 Phase) - Electric Power
    Fuel System
    Natural Gas / LP Vapor
    Frequency
    60 Hz
    Emissions/Fuel Strategy
    U.S. EPA Certified for Stationary Emergency Application
  • T109 Manual Side Shift - Trenchers
    Overall Length
    92.4 in
    Overall Height
    30.9 in
    Overall Width
    56.1 in
  • 3.5 m3 (4.6 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    4.6 yd³
    Width
    107.4 in
    Weight
    3961.7 lb
  • 302.7 CR - Excavators
    Gross Power - 2,400 rpm - SAE J1995:2014
    24.7 HP
    Operating Weight
    6703 lb
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
    0.9 yd³
    Width
    74.1 in
    Weight
    665.8 lb
  • 236D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    74.3 HP
    Operating Weight
    6567 lb
    Rated Operating Capacity
    1800 lb
  • 982M - Wheel Loaders
    Net Power - ISO 9249
    398 HP
    Operating Weight
    78402 lb
    Bucket Capacities
    4.6-12.0 m³ (6.0-15.75 yd³)
  • 3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    5 yd³
    Width
    108.1 in
    Weight
    3024.7 lb
  • 1.5 m3 (2.0 yd3), Skid Steer Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
    2 yd³
    Width
    81.9 in
    Weight
    1134.9 lb
  • 2188 mm (86 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
    0.82 yd³
    Width
    86.1 in
    Weight
    670.2 lb
  • 816 - Compactors
    Gross Power (SAE J1995:2014)
    284 HP
    Operating Weight
    57345 lb
  • 0.96 m3 (1.25 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
    1.25 yd³
    Overall Width
    109.1 in
    Weight
    2223.8 lb
  • CTX Series Automatic Transfer Switch - Electric Power
    Rating Range
    40-400A
    Transfer Type
    Open transition
    Switch Type
    Contactor Based
  • G345 Demolition & Sorting Grapple: 587-8995 - Grapples
    Capacity
    1.31 yd³
    Weight
    6080 lb
  • CTGSE & CTGDSE Series Service Rated Entrance Rated ATS - Electric Power
    Rating Range
    40-3000A
    Transfer Type
    Open Transition with Service Entrance
    Switch Type
    Contactor Based
  • DE169AE0 (50 Hz) - Electric Power
    Minimum Rating
    135.0 kVA
    Maximum Rating
    149.0 kVA
    Emissions/Fuel Strategy
    Non-Certified Emissions
  • 490 mm (19 in) - Rippers
    Overall Length
    25.9 in
    Weight
    99.2 lb
    Width
    10 in
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
    2.8 ft³
    Width
    12 in
    Weight
    213.8 lb
  • 330 GC - Excavators
    Engine Power - ISO 9249
    202 HP
    Operating Weight
    67700 lb
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
    6.7 ft³
    Width
    30 in
    Weight
    440.9 lb
  • GSH455 4-Tine, 1000-Liter Orange Peel Grapple - Grapples
    Capacity
    1.5 yd³
    Operating Weight
    5666 lb
  • 340 Straight Boom - Excavators

    -
    Operating Weight
    88500 lb
  • P332 Primary Pulverizer - Pulverizers

    -
    Width
    790 mm
  • A41 - Augers
    Drive Shaft Torque at Maximum Pressure
    3037.3 lb/ft
    Drive Method
    Gerotor Motor - Single Planetary Reduction
    Mounting Bracket Design
    Skid Steer Loader Coupler
  • 508 mm (20 in) - Buckets - Excavator
    Rated Capacity
    3.3 yd³
    Width
    20 in
    Weight
    191.8 lb
  • 1.0 m3 (1.3 yd3), Skid Steer Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
    1.3 yd³
    Width
    80.5 in
    Weight
    908.1 lb
  • UD550E

    -

    -
  • 4.1 m3 (5.4 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    5.4 yd³
    Width
    119.4 in
    Weight
    4753.2 lb
  • DG300 GC (3 phase) - Electric Power
    Fuel Type
    Natural Gas
    Frequency
    60 Hz
    Emissions/Fuel Strategy
    U.S. EPA Certified for Stationary Emergency Application
  • 317 - Excavators

    -
    Operating Weight
    38900 lb
  • CC2.6 - Compactors
    Gross Power
    30.7 HP
    Operating Weight
    4982 lb
    Standard Compaction Width
    47 in
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
    0.58 yd³
    Width
    80.2 in
    Weight
    584.2 lb
  • C280-6 - Marine Power Systems
    Maximum Rating
    1820 ekW (2275 kVA)
    Minimum Rating
    1760 ekW (2200 kVA)
    Frequency
    50 Hz or 60 Hz
  • DE550 GC (50 Hz) - Electric Power
    Minimum Rating
    550 kVA
    Maximum Rating
    550 kVA
    Emissions/Fuel Strategy
    Non Regulated
  • TRS10 Tiltrotator: 516-6766 - Tilt Rotate Systems

    -

    -
  • 814K - Dozers
    Net Power
    248 HP
    Operating Weight
    48390 lb
  • QJ341/+

    -

    -
  • 3.05 m (10 ft) - Snow Pushes
    Weight
    1153 lb
    Overall Height
    39.1 in
    Working Width
    120 in
  • 1120 mm (44 in) - Fork Accessories

    -

    -
  • 0.8 m3 (1.0 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
    1 yd³
    Width
    74.4 in
    Weight
    1297.4 lb
  • 9m³ (11.8yd³) Iron Ore - Buckets - Loader
    Capacity
    11.8 yd³
    Width
    193 in
    Weight
    24577 lb
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
    17 yd³
    Width
    162 in
    Weight
    14186 lb
  • TRANSMISSION

    -

    -
  • 6.9m³ (9yd³) Serrated Edge - Buckets - Loader
    Capacity
    9 yd³
    Width
    156 in
    Weight
    10540 lb
  • 950 mm (37 in) - Rippers
    Overall Length
    31.3 in
    Weight
    372.6 lb
    Width
    16.5 in
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
    4.5 yd³
    Width
    115 in
    Weight
    3139 lb
  • 1812 mm (71 in), Fusion™ Coupler - Forks
    Carriage Width
    71.3 in
    Grapple Height
    102.6 in
    Grapple Weight
    3860.3 lb
  • 990K Millyard Arrangement - Wheel Loaders
    Net Power
    699 HP
    Operating Weight
    202398 lb
  • 3516C Industrial Power Unit - Industrial
    Maximum Power
    2100 HP
    Rated Speed
    1750 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    7840 kg (17,284 lb)
  • 303 CR - Excavators
    Gross Power - SAE J1995:2014
    24.7 HP
    Operating Weight
    7817 lb
  • 305E2 CR - Excavators
    Gross Power - ISO 14396
    41.8 HP
    Operating Weight
    11443 lb
  • 239D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    67.1 HP
    Operating Weight
    7434 lb
  • 1.4 m3 (1.8 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
    2 yd³
    Width
    94.5 in
    Weight
    1276 lb
  • 0.8 m3 (1.0 yd3), Skid Steer Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
    1 yd³
    Width
    74.4 in
    Weight
    1131 lb
  • 302.4D - Excavators
    Gross Power - ISO 14396
    24.3 HP
    Operating Weight
    5115 lb
  • 249D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    67.1 HP
    Operating Weight
    7831 lb
  • 1370 mm (54 in) - Fork Accessories

    -

    -
  • DE100AE0 (50 Hz) - Electric Power
    Minimum Rating
    80.0 kVA
    Maximum Rating
    88.0 kVA
    Emissions/Fuel Strategy
    Non-Certified Emissions
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
    4.5 yd³
    Width
    106 in
    Weight
    2381 lb
  • 2337 mm (92 in) - Blades
    Overall Width
    92 in
    Length
    40.5 in
  • 730 - Articulated Trucks
    Gross Power - SAE J1995
    375 HP
    Rated Payload
    31 ton (US)
    Heaped (SAE 2:1)
    23 yd³
  • 1220 mm (48 in) - Fork Accessories

    -

    -
  • H35s - Hammers

    -

    -
  • 1.2 m3 (1.6 yd3), Skid Steer Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
    1.6 yd³
    Width
    81.9 in
    Weight
    1015.9 lb
  • 796 AC - Off-Highway Trucks
    Gross Power - SAE J1995
    3500 HP

    -
    Top Speed - Loaded
    40 mile/h
  • Skid Steer to Horizontal Pin Lock Adapter - Adapters

    -

    -
  • 406 mm (16 in), Pin On - Buckets - Backhoe Rear
    Capacity
    3.7 ft³
    Width
    16 in
    Weight
    280 lb
  • CS76B - Compactors
    Gross Power
    173.5 HP
    Operating Weight - With ROPS/FOPS
    38405 lb
    Compaction Width
    84 in
  • 4.1 m3 (5.4 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    5.4 yd³
    Width
    119.4 in
    Weight
    4687 lb
  • 1067 mm (42 in) - Forks
    Fork Tine Width
    5 in
    Fork Tine Thickness
    2 in
    Fork Tine Length
    42 in
  • 1500 mm (59 in), Pin On - Buckets - Backhoe Rear
    Capacity
    18.6 ft³
    Width
    59.1 in
    Weight
    743 lb
  • 302 CR - Excavators
    Gross Power - ISO 14396
    21.6 HP
    Operating Weight
    4987 lb
  • TRS10 Tiltrotator: 555-1563 - Tilt Rotate Systems

    -

    -
  • 3508C - Marine Power Systems
    Power Range
    775-1100 bhp (578-820 bkW)
    Speed Range
    1200-1600 rpm
    Emissions
    IMO II, EU IW
  • 0.8 m3 (1.0 yd3), Skid Steer Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
    1 yd³
    Width
    74.4 in
    Weight
    1177 lb
  • DE150 GC (50 Hz) - Electric Power
    Minimum Rating
    150 kVA
    Maximum Rating
    150 kVA
    Emissions/Fuel Strategy
    Non Regulated
  • 21.41 m³ (28.0 yd³) - Blades
    Capacity
    28 yd³
    Width
    218 in
  • 1.6 m3 (2.1 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
    2.4 yd³
    Width
    95.6 in
    Weight
    1300.9 lb
  • SE50 VT Tamper Bar Screed - Asphalt Pavers
    Standard Weight
    7363 lb
    Standard Paving Range
    2.55 - 5.0 m (8' 4" - 16' 4")
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
    4.2 ft³
    Width
    18 in
    Weight
    284.4 lb
  • 242D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    74.3 HP
    Operating Weight
    7138 lb
    Rated Operating Capacity
    2200 lb
  • 3.4m³ (4.5yd³) Performance Series - Buckets - Loader
    Capacity
    4.5 yd³
    Width
    128 in
    Weight
    5207 lb
  • 826K - Compactors
    Gross Power
    435 HP
    Operating Weight
    90207 lb
  • PM825 - Cold Planers
    Rated Power
    800.6 HP
    Operating Weight
    82673 lb
    Milling Width
    98.6 in
  • D5K2 Tier 4 Final/Stage IV - Dozers
    Power - Net
    104 HP
    Operating Weight - XL
    20313 lb
  • 1.3 m3 (1.7 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
    1.7 yd³
    Width
    72 in
    Bucket Weight
    768 lb
  • ADVANTAGES OF A REMANUFACTURED PART

    -

    -
  • 3516C (50 Hz) - Electric Power
    Minimum Rating
    2500 kVA
    Maximum Rating
    2750 kVA
    Emissions/Fuel Strategy
    Low Fuel, Low Emissions
  • TRS23 Tiltrotator: 558-8925 - Tilt Rotate Systems

    -

    -
  • 619 mm (24 in) - Buckets - Excavator
    Rated Capacity
    4.2 yd³
    Width
    24.4 in
    Weight
    216.1 lb
  • 216B3 - Skid Steer Loaders
    Gross Power - SAE J1995
    51 HP
    Operating Weight
    5690 lb
    Rated Operating Capacity
    1400 lb
  • C1.1 (50 Hz) - Electric Power
    Minimum Rating
    6.8 kVA
    Maximum Rating
    9.5 kVA
    Emissions/Fuel Strategy
    EU Stage IIIA
  • 854K - Dozers
    Gross Power
    907 HP
    Operating Weight
    224254 lb
  • 735 - Articulated Trucks
    Gross Power - SAE J1995
    434 HP
    Rated Payload
    35.3 ton (US)
    Heaped (SAE 2:1)
    26.2 yd³
  • 745 - Articulated Trucks
    Gross Power - SAE J1995
    511 HP
    Rated Payload
    45.2 t
    Heaped (SAE 2:1)
    32.7 yd³
  • HM112 - Mulchers
    Overall Width
    59.8 in
    Weight
    1682.1 lb
    Required Hydraulics
    Standard Flow
  • 3516 - Industrial
    Maximum Power
    2000 HP
    Rated Speed
    1200-1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    7484 kg (16,499 lb)
  • DE55 GC (60 Hz) - Electric Power
    Minimum Rating
    50 ekW
    Maximum Rating
    50 ekW
    Emissions/Fuel Strategy
    Non Regulated
  • 305 mm (12 in) - Buckets - Excavator
    Rated Capacity
    1.7 yd³
    Width
    12 in
    Weight
    143.3 lb
  • 1220 mm (48 in) - Fork Accessories

    -

    -
  • C280-12 Tier 4 - Marine Power Systems
    Power Range
    4962-5444 bhp (3700-4060 bkW)
    Speed Range
    1000 rpm
    Emissions
    EPA Tier 4, IMO II
  • CB7 - Compactors
    Gross Power
    100 HP
    Operating Weight
    17615 lb
    Standard Compaction Width
    59 in
  • C15 Sound Attenuated Enclosure 50 and 60 Hz - Generator Set Enclosures

    -

    -
  • B8s - Hammers

    -

    -
  • C18 ACERT IMO II - Marine Power Systems
    Power Range
    454-715 bhp (339-533 bkW)
    Speed Range
    1800-2100 rpm
    Emissions
    IMO II, EU IIIA
  • 3612 - Industrial
    Maximum Power
    4962 HP
    Rated Speed
    750-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    25,140 kg (55,300 lb)
  • 2.7 m3 (3.5 yd3), Pin On - Buckets - Loader
    Capacity
    3.5 yd³
    Width
    107.4 in
    Weight
    2250.9 lb
  • 23m³ (31yd³) - Buckets - Loader
    Capacity
    31 yd³
    Width
    248 in
    Weight
    38880 lb
  • 3512 (50 Hz) - Electric Power
    Minimum Rating
    1000 kVA
    Maximum Rating
    1400 kVA
    Emissions/Fuel Strategy
    Low Fuel Consumption
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
    5.6 yd³
    Width
    47.2 in
    Weight
    357.8 lb
  • 1.9 m3 (2.5 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
    2.5 yd³
    Width
    99.7 in
    Weight
    1708.6 lb
  • 907M Ag Handler - Wheel Loaders
    Rated Net Power - 2,500 rpm - SAE J1349
    68 HP
    Operating Weight
    12958 lb
    Bucket Capacities
    0.75-1.5 m³ (1.0-2.0 yd³)
  • HM115 - Mulchers
    Overall Width
    69.2 in
    Weight
    1803.4 lb
    Required Hydraulics
    Standard Flow
  • 2.5 m3 (3.3 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    3.2 yd³
    Width
    108.1 in
    Weight
    2533.1 lb
  • 3.8m³ (5yd³) - Buckets - Loader
    Capacity
    5 yd³
    Width
    115 in
    Weight
    3280 lb
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
    0.8 ft³
    Width
    11.8 in
    Weight
    68.6 lb
  • PM620 - Cold Planers
    Rated Power
    630 HP
    Operating Weight
    73480 lb
    Milling Width
    79.1 in
  • DG200 GC (3 phase) - Electric Power
    Fuel System
    Carburetor, Down Draft
    Frequency
    60 Hz
    Emissions/Fuel Strategy
    U.S. EPA Certified for Stationary Emergency Application
  • 3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    5 yd³
    Width
    108.1 in
    Weight
    3062.2 lb
  • DE33 GC (50 Hz) - Electric Power
    Minimum Rating
    33.0 kVA
    Maximum Rating
    33.0 kVA
    Emissions/Fuel Strategy
    Non Regulated
  • 1 m3 (1.3 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
    1.3 yd³
    Width
    95 in
    Bucket Weight
    1007 lb
  • C175-16 (50 Hz) - Electric Power
    Minimum Rating
    2500 kVA
    Maximum Rating
    3100 kVA
    Emissions/Fuel Strategy
    Low Fuel, Low Emissions
  • M 20 C - Marine Power Systems
    Maximum Rating
    1726 kWe (2160 kVA)
    Minimum Rating
    979 kWe (1224 kVA)
  • D2 - Dozers
    Power - Net
    92 HP
    Operating Weight
    18382 lb
  • PM310 Track Undercarriage - Cold Planers
    Rated Power
    336.6 HP
    Operating Weight
    48016 lb
    Milling Width
    39.4 in
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
    17 yd³
    Width
    200 in
    Weight
    29435 lb
  • Pumps & Motors

    -

    -
  • TH3510D Ag Handler

    -

    -
  • DE450 GC (50 Hz) - Electric Power
    Minimum Rating
    450 kVA
    Maximum Rating
    450 kVA
    Emissions/Fuel Strategy
    Non Regulated
  • GSV525 5-Tine, 950-Liter Orange Peel Grapple - Grapples
    Capacity
    1.25 yd³
    Operating Weight
    4072 lb
  • 1.6 m3 (2.1 yd3), Fusion™ Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader

    -
    Width
    95.9 in
    Weight
    1426.4 lb
  • C32 (50 Hz) - Electric Power
    Minimum Rating
    910 kVA
    Maximum Rating
    1500 kVA
    Emissions/Fuel Strategy
    Low Fuel Consumption, Low Emissions, EPA Certified for Stationary Emergency Application (Emits Equivalent U.S. EPA Tier 2 Nonroad Standards)
  • 17m³ (22.5yd³) - Buckets - Loader
    Capacity
    22.5 yd³
    Width
    222 in
    Weight
    42955 lb
  • R1700G - Underground - Hard Rock
    Gross Power - SAE J1995
    353 HP
    Loaded
    112436 lb
    Nominal Payload Capacity - Tramming
    30865 lb
  • 1000 mm (40 in) - Buckets - Excavator
    Capacity
    56.6 l
    Width
    39.4 in
    Weight
    93.7 lb
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
    0.48 yd³
    Width
    68.1 in
    Weight
    511.5 lb
  • 740 GC - Articulated Trucks
    Gross Power - SAE J1995
    452 HP
    Rated Payload
    40 ton (US)
    Heaped (SAE 2:1)
    29.7 yd³
  • C7.1 (50 Hz) - Electric Power
    Minimum Rating
    135 kVA
    Maximum Rating
    220 kVA
    Emissions/Fuel Strategy
    Non Regulated, EU Stage IIIA
  • S3025 Rotating Scrap & Demolition Shear - Shears
    Length
    126 in
    Height
    48 in
    Width
    29.5 in
  • CD8 - Solid Drum - Compactors
    Gross Power
    100 HP
    Operating Weight
    16314 lb
    Standard Compaction Width
    59 in
  • 12.2m³ (16yd³) - Buckets - Loader
    Capacity
    16 yd³
    Width
    203 in
    Weight
    33451 lb
  • 2.5 m3 (3.3 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    3.3 yd³
    Width
    108.1 in
    Weight
    2581.6 lb
  • TH417D

    -

    -
  • MP324 Universal Jaw - Multi-Processors
    Length
    86.1 in
    Height
    57.6 in
    Width
    31.2 in
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
    68.1 in
    Height - Grapples Closed
    20.7 in
    Jaw Opening
    40 in
  • 3.05 m (10 ft) - Snow Pushes
    Weight
    3692.7 lb
    Overall Height
    38.4 in
    Working Width
    120 in
  • B4s - Hammers

    -

    -
  • 289D - Compact Track and Multi Terrain Loaders
    Gross Power
    74.3 HP
    Operating Weight
    10533 lb
  • 992 - Wheel Loaders
    Net Power
    814 HP
    Operating Weight
    233430 lb
    Bucket Capacities
    11.5-24.5 m³ (15-32 yd³)
  • 2.3 m3 (3.0 yd3), ISO Coupler - Buckets - Loader
    Capacity
    3 yd³
    Width
    99.7 in
    Weight
    1832 lb
  • 13.8m³ (18yd³) - Buckets - Loader
    Capacity
    18 yd³
    Width
    200 in
    Weight
    30852 lb
  • 962M - Wheel Loaders
    Maximum Net Power - 2,100 rpm - ISO 9249
    250 HP
    Operating Weight
    44591 lb
    Bucket Capacities
    2.5-9.2 m³ (3.3-12.0 yd³)
  • 309 CR - Excavators
    Gross Power - ISO 14396
    74.3 HP
    Operating Weight
    21091 lb
  • 1370 mm (54 in) - Fork Accessories

    -

    -
  • A11 - Augers
    Drive Shaft Torque at Maximum Pressure
    815 lb/ft
    Drive Method
    Gerotor Motor - Direct Drive
    Mounting Bracket Design
    2 Ton Mini Excavator Pin On
  • DG200 GC (Single-phase) - Electric Power
    Fuel System
    Carburetor, Down Draft
    Frequency
    60 Hz
    Emissions/Fuel Strategy
    U.S. EPA Certified for Stationary Emergency Application
  • CB2.5 - Compactors
    Gross Power
    30.7 HP
    Operating Weight
    4960 lb
    Standard Compaction Width
    39 in
  • LR116 - Rakes
    Bucket Capacity - Struck
    0.4 yd³
    Weight
    1311.7 lb
    Length
    63.8 in
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
    74.1 in
    Height - Grapples Closed
    20.7 in
    Jaw Opening
    40 in
  • 844K - Dozers
    Gross Power
    752 HP
    Operating Weight
    165089 lb
  • 3512C HD - Marine Power Systems
    Power Range
    1340-2366 bhp (1000-1765 bkW)
    Speed Range
    1600-1800 rpm
    Emissions
    EPA Tier 3, IMO II
  • 2188 mm (86 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
    0.56 yd³
    Width
    86.1 in
    Weight
    1071.4 lb
  • GSH520 5-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
    1 yd³
    Operating Weight
    3166 lb
  • BA118C Hydraulic - Brooms
    Overall Width
    103.8 in
    Sweeping Width
    83.4 in
    Brush Diameter
    32.1 in
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
    10.3 ft³
    Width
    36 in
    Weight
    416.7 lb
  • 6.9m³ (9yd³) Performance Series - Buckets - Loader
    Capacity
    9 yd³
    Width
    158 in
    Weight
    11098 lb
  • GSM50 5-Tine, 2000-Liter Orange Peel Grapple - Grapples
    Capacity
    2.5 yd³
    Operating Weight
    7452 lb
  • TRS10 Tiltrotator: 544-1342 - Tilt Rotate Systems

    -

    -
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
    3.2 ft³
    Width
    23.6 in
    Weight
    155.4 lb
  • CW-40S - Couplers - Excavator
    Weight
    473 lb
    Width
    16.8 in
    Load Rating, Hoisting Hook
    11 ton (US)
  • 301.8 - Excavators
    Gross Power - ISO 14396
    21.6 HP
    Operating Weight
    4473 lb
  • C27 and C32 Sound Attenuated Enclosure - Generator Set Enclosures

    -

    -
  • 315 - Excavators

    -
    Operating Weight
    34000 lb
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
    2.5 ft³
    Width
    12 in
    Weight
    249.1 lb
  • 1.3 m3 (1.7 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
    1.7 yd³
    Width
    95.8 in
    Weight
    1011.9 lb
  • UH640E

    -

    -
  • P324 Primary Pulverizer - Pulverizers

    -
    Width
    790 mm
  • 2.7 m3 (3.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    3.5 yd³
    Width
    108.1 in
    Weight
    2685.2 lb
  • CVP16 - Compactors
    Impulse Force
    3641.91 lb

    -
    Base Plate Width
    12 in
  • PM310 Wheel Undercarriage - Cold Planers
    Rated Power
    336.6 HP
    Operating Weight
    46473 lb
    Milling Width
    39.4 in
  • CS56B - Compactors
    Gross Power
    156.9 HP
    Operating Weight - With ROPS/FOPS
    26352 lb
    Compaction Width
    84 in
  • DE65 GC (50 Hz) - Electric Power

    -

    -
  • 12m³ (15.7yd³) Heavy Rock - Buckets - Mining Shovels

    -

    -
  • 303E CR - Excavators
    Gross Power
    24.8 HP
    Operating Weight with Cab - Long Stick
    7296 lb
  • CG170-12 - Electric Power
    Fuel Type
    Natural Gas, Biogas, Coal Gas
    Frequency
    50 or 60 Hz
  • 13.38 m³ (17.5 yd³) - Blades
    Capacity
    17.5 yd³
    Width
    168 in
  • C32 - Industrial
    Maximum Power
    1200 HP
    Rated Speed
    1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    6625 lb
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity - Adapters
    14 yd³
    Width
    200 in
    Weight
    25485 lb
  • 1370 mm (54 in) - Fork Accessories

    -

    -
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
    92.4 in
    Overall Height
    30.9 in
    Overall Width
    56.1 in
  • 257D - Compact Track and Multi Terrain Loaders
    Gross Power
    74.3 HP
    Operating Weight
    8048 lb
    Rated Operating Capacities - 50% Tipping Load
    2800 lb
  • MP318 Concrete Cutter Jaw - Multi-Processors

    -

    -
  • C32 ACERT Tier 3 - Marine Power Systems
    Power Range
    750-1800 bhp (559-1342 bkW)
    Speed Range
    1600-2300 rpm
    Emissions
    EPA Tier 3, IMO II, EU IW
  • DE33 GC (60 Hz) - Electric Power
    Minimum Rating
    30.0 ekW
    Maximum Rating
    30.0 ekW
    Emissions/Fuel Strategy
    Non Regulated
  • G312 GC Demolition & Sorting Grapple: 587-8713 - Grapples
    Capacity
    0.52 yd³
    Weight - Including Bracket
    2281.78 lb
  • DG230 GC (3 phase) - Electric Power

    -
    Frequency
    60 Hz
    Emissions/Fuel Strategy
    U.S. EPA Certified for Stationary Emergency Application
  • 0.9 m3 (1.2 yd3), Skid Steer Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
    1.2 yd³
    Width
    81.9 in
    Weight
    1283.1 lb
  • 0.6 m3 (0.8 yd3), Skid Steer Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
    0.8 yd³
    Width
    70.5 in
    Weight
    686.1 lb
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
    2.7 ft³
    Width
    23.6 in
    Weight
    142.6 lb
  • 10.4m (13.6)yd Coal - Buckets - Mining Shovels

    -

    -
  • 890 mm (35 in) - Bale Spears
    Overall Width
    55.4 in
    Overall Height
    51.8 in
    Capacity
    3007.1 lb
  • 610 mm (24 in) - Augers
    Diameter
    610/305 mm (24/12 in)
    Weight
    163.1 lb
    Overall Length
    50.7 in
  • Heavy Duty Bucket 1050 mm (42 in): 558-7939 - Buckets - Excavator
    Capacity
    1.31 yd³
    Width
    42 in
    Weight
    2085 lb
  • PR184 Hydraulic Angle - Rakes
    Overall Width
    93 in
    Weight
    1049.4 lb
    Overall Length
    64 in
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
    62 in
    Height - Grapples Closed
    20.7 in
    Jaw Opening
    40 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
    2786.6 lb
    Overall Height
    42.8 in
    Working Width
    144 in
  • C9.3 Auxiliary Engine - Marine Power Systems
    Maximum Rating
    436 BHP
    Minimum Rating
    292 BHP
    Aspiration
    TA
  • QA441/e

    -

    -
  • WEAR PROTECTION

    -

    -
  • Pin Grabber Coupler - Trenching Profile (CB-Linkage): 389-7526 - Couplers - Excavator
    Weight
    949 lb
    Width - Machine Interface
    19.3 in
    Lifting Eye Working Load Limit
    30865 ton (US)
  • 3516 - Industrial
    Maximum Power
    1985 HP
    Rated Speed
    1460-1750 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
    8074 kg (17800 lb)
  • Engine Paralleling and Integration Control (EPIC) - Electric Power
    Configuration
    Remote modular paralleling control system (Master Control Panel for the first 2 generator sets and optional tie breaker, separate add-on control panels for up to 8 additional generator sets, utility paralleling control, and distribution control)
    Modes of Operation
    Emergency Standby with redundant master control, Utility paralleling, peak shaving, and closed transition to/from Generator Power (with optional utility control panel)
    Application
    LV and MV (208V-27kV)
  • 1290mm (51in) Ripper - Rippers
    Overall Length
    67 in
    Weight
    1717 lb
    Width
    22.4 in
  • D7E - Dozers
    Flywheel Power
    238 HP
    Operating Weight
    57441 lb
  • GSH420 4-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
    1 yd³
    Operating Weight
    2648 lb
  • CG132B-16 - Electric Power

    -

    -
  • C32 Tier 3 / IMO II - Marine Power Systems
    Maximum Rating
    1333 BHP
    Minimum Rating
    314 BHP
    Aspiration
    Turbocharged-aftercooled aspiration
  • 7.7m³ (10yd³) Performance Series - Buckets - Loader
    Capacity
    10 yd³
    Width
    158 in
    Weight
    11713 lb
  • 1676 mm (66 in) - Forks
    Width
    66 in
    Height - Grapples Closed
    30.3 in
    Jaw Opening
    34.5 in
  • 2.5 m3 (3.3 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
    3.3 yd³
    Width
    107.4 in
    Weight
    2123 lb
  • 262D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    74.3 HP
    Operating Weight
    8296 lb
    Rated Operating Capacity
    2700 lb
  • 610 mm (24 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
    9.2 ft³
    Width
    24 in
    Weight
    427.7 lb
  • C4.4 - Marine Power Systems
    Maximum Rating
    99.0 ekW (123 kVA)
    Minimum Rating
    36.0R ekW (45 kVA)
    Frequency
    50 Hz or 60 Hz
  • 1270 mm (50 in) - Fork Accessories

    -

    -
  • 1.9 m3 (2.5 yd3), Fusion™ Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader

    -
    Width
    95.9 in
    Weight
    1618.2 lb
  • 920 - Wheel Loaders
    Rated Net Power - Rated Engine Speed
    2200 r/min
    Operating Weight
    21742 lb
    Bucket Capacities
    1.3-1.9 m3 (1.7-2.5 yd3)
  • 352F L XE - Excavators

    -
    Operating Weight
    113229 lb
  • 2m³ (2.6yd³) - Buckets - Loader
    Capacity
    2.6 yd³
    Width
    100 in
    Weight
    2119 lb
  • 2.5 m3 (3.3 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
    3.2 yd³
    Width
    99.2 in
    Weight
    2120.8 lb
  • 18.35 m³ (24.0 yd³) - Blades
    Capacity
    23.7 yd³
    Width
    168 in
  • GSH525 5-Tine, 950-Liter Orange Peel Grapple - Grapples
    Capacity
    1.25 yd³
    Operating Weight
    4233 lb
  • P225 - Pulverizers
    Capacity - Concrete Thickness
    29.5 in
    Width
    24.6 in
    Weight
    5467 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
    2932.1 lb
    Overall Height
    44.4 in
    Working Width
    144 in
  • 4.87 m (16 ft) - Snow Pushes
    Weight
    3112.9 lb
    Overall Height
    42.8 in
    Working Width
    192 in
  • 3616 - Industrial
    Maximum Power
    6598 HP
    Rated Speed
    800-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    29,950 kg (65,900 lb)
  • DE500S GC (60 Hz) - Electric Power
    Minimum Rating
    500 ekW
    Maximum Rating
    500 ekW
    Emissions/Fuel Strategy
    Non Regulated
  • 12.2m³ (16yd³) Serrated Edge - Buckets - Loader
    Capacity
    16 yd³
    Width
    190 in
    Weight
    22620 lb
  • GSH555 5-Tine, 1000-Liter Orange Peel Grapple - Grapples
    Capacity
    1.5 yd³
    Operating Weight
    6834 lb
  • CS10 GC - Compactors
    Gross Power
    120.7 HP
    Operating Weight - With ROPS/FOPS Canopy
    22796 lb
    Compaction Width
    84 in
  • CAT® SYSTEMONE

    -

    -
  • DG250 GC (3 phase) - Electric Power
    Fuel System
    Carbureter, Down Draft
    Frequency
    60 Hz
    Emissions/Fuel Strategy
    U.S. EPA Certified for Stationary Emergency Application
  • HM418 - Mulchers
    Overall Width
    83.5 in
    Weight
    3196.7 lb
    Required Hydraulics
    XHP / XE
  • 2007 mm (79 in) - Blades
    Overall Width
    79 in
    Length
    40.5 in
  • 5.7m³ (7.5yd³) - Buckets - Loader
    Capacity
    7.5 yd³
    Width
    130 in
    Weight
    3800 lb
  • C280-16 - Marine Power Systems
    Maximum Rating
    4840 ekW (6050 kVA)
    Minimum Rating
    4700 ekW (5875 kVA)
    Frequency
    50 Hz or 60 Hz
  • MP318 Shear Jaw - Multi-Processors
    Length
    51.1 in
    Height
    31.2 in
    Width
    74.7 in
  • 2.9 m3 (3.8 yd3), ISO Coupler - Buckets - Loader
    Capacity
    3.8 yd³
    Width
    107.4 in
    Weight
    2198 lb
  • 15m³ (19.5yd³) - Buckets - Loader
    Capacity
    19.5 yd³
    Width
    222 in
    Weight
    42465 lb
  • G317 GC Demolition & Sorting Grapple: 587-8720 - Grapples
    Capacity
    0.49 yd³
    Weight - Including Bracket
    2266 lb
  • H120 S - Hammers
    Impact Energy Class
    3500 ft·lbf
    Blows per Minute
    350-620
    Maximum Operating Weight
    4101 lb
  • DE56AE0 (60 Hz) - Electric Power
    Minimum Rating
    40 ekW
    Maximum Rating
    45 ekW
    Emissions/Fuel Strategy
    Non-Certified Emissions
  • 303.5 CR - Excavators
    Gross Power - 2,400 rpm - SAE J1995
    24.7 HP
    Operating Weight
    9239 lb
  • C4.4 - Industrial
    Maximum Power
    173.5 HP
    Rated Speed
    2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    400-420 kg (881.8-926 lb)
  • 400 mm (16 in) - Buckets - Excavator
    Capacity
    1.2 ft³
    Width
    15.7 in
    Weight
    78 lb
  • H120 GC S - Hammers
    Impact Energy Class
    2950 ft-lb
    Blows per Minute
    400-800
    Maximum Operating Weight
    3927 lb
  • 1000 mm (39 in) - Buckets - Excavator
    Capacity
    6 ft³
    Width
    39.4 in
    Weight
    258.6 lb
  • Material Handling Arm - Material Handling
    Maximum Load Rating
    1999.6 lb
    Retracted Length
    40 in
  • 798 AC - Off-Highway Trucks
    Gross Power - SAE J1995
    3500 HP

    -
    Top Speed - Loaded
    40 mile/h
  • 834K Scoops for Coal & Woodchips - Dozers
    Net Power
    496 HP
    Operating Weight
    112838 lb
  • 2.3 m3 (3.0 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
    3 yd³
    Width
    100 in
    Weight
    1902.6 lb
  • HOSE & COUPLINGS

    -

    -
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
    5 ft³
    Width
    24 in
    Weight
    383.6 lb
  • 1.9 m3 (2.5 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
    2.6 yd³
    Width
    94.5 in
    Weight
    1470 lb
  • 2.1 m3 (2.7 yd3), ISO Coupler - Buckets - Loader
    Capacity
    2.7 yd³
    Width
    99.7 in
    Weight
    1748.3 lb
  • 725C2 - Articulated Trucks
    Gross Power - SAE J1995
    320 HP
    Rated Payload
    26.5 ton (US)
    Heaped (SAE 2:1)
    19.6 yd³
  • C9 230-275 kVA ACERT - Generator Set Enclosures

    -

    -
  • T112 Manual Side Shift - Trenchers
    Overall Length
    106.5 in
    Overall Height
    30.9 in
    Overall Width
    74.8 in
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
    1.6 ft³
    Width
    19.7 in
    Weight
    90.2 lb
  • C32 Tier 4 / IMO III - Marine Power Systems
    Maximum Rating
    940 ekW
    Minimum Rating
    282 ekW
    Frequency
    60hz
  • C4.4 - Industrial
    Maximum Power
    129.4 HP
    Rated Speed
    2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
    520 kg (1146 lb)
  • BR118 - Brushcutters
    Overall Width
    74 in
    Cutting Width
    72 in
    Maximum Cutting Diameter
    3 in
  • 1676 mm (66 in) - Forks
    Width
    66 in
    Height
    22.9 in
    Weight
    436.5 lb
  • 309 CR - Excavators
    Gross Power - ISO 14396
    74.3 HP
    Operating Weight
    21091 lb
  • G3406 - Industrial
    Maximum Power
    325 HP

    -
    Weight - Net Dry
    1362 kg (3000 lb)
  • 1070 mm (42 in) - Forks
    Fork Tine Width
    4 in
    Fork Tine Thickness
    1.77 in
    Fork Tine Length
    42 in
  • GSV525 5-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
    1 yd³
    Operating Weight
    3946 lb
  • C18 - Industrial
    Maximum Power
    800 HP
    Rated Speed
    1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    1673 kg (3688 lb)
  • C15 - Industrial
    Maximum Power
    580 HP
    Rated Speed
    1800-2100 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
    2113-2650 kg (4658-5842 lb)
  • 313 - Excavators

    -
    Operating Weight
    30400 lb
  • 340F UHD - Excavators

    -
    Operating Weight
    117103 lb
  • 6.8-22 kVA SA Lvl1, Lvl2 & Lvl3 (B Series) - Generator Set Enclosures

    -

    -
  • BR320 - Brushcutters
    Overall Width
    80 in
    Cutting Width
    78 in
    Maximum Cutting Diameter
    3 in
  • 744mm (29in) Ripper - Rippers
    Overall Length
    38 in
    Weight
    439 lb
    Width
    11.4 in
  • 226D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    67.1 HP
    Operating Weight
    5849 lb
    Rated Operating Capacity
    1550 lb
  • RM300 - Road Reclaimers
    Gross Power
    350 HP
    Maximum Operating Weight
    53911 lb
    Cutting/Mixing Width
    96 in
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
    1.21 ft³
    Width
    11.8 in
    Weight
    100.5 lb
  • 14.5m³ (19yd³) - Buckets - Loader
    Capacity
    19 yd³
    Width
    175 in
    Weight
    15400 lb
  • DFS121 - Silage Defacers
    Weight
    1051.6 lb
    Overall Height
    25.2 in
    Overall Width
    84.5 in
  • 335 - Excavators

    -
    Operating Weight
    77000 lb
  • 65.75 m³ (86.0 yd³) - Blades
    Capacity
    86 yd³
    Width
    290 in
  • 3512C - Marine Power Systems
    Maximum Rating
    1700 eKW (2125 kVA)
    Minimum Rating
    1550 eKW (1937 kVA)
    Frequency
    60 hz
  • 2.9 m3 (3.8 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    3.8 yd³
    Width
    108 in
    Weight
    2758 lb
  • MP324 Concrete Cutter Jaw - Multi-Processors
    Length
    84 in
    Height
    59 in
    Width
    31 in
  • C4.4 - Industrial
    Maximum Power
    200 HP
    Rated Speed
    2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    1180 lb
  • 1730 mm (68 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
    0.44 yd³
    Width
    68.1 in
    Weight
    868.6 lb
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
    2.1 ft³
    Width
    19.7 in
    Weight
    129 lb
  • 3.25m³ (4.25yd³) - Buckets - Loader
    Capacity
    4.25 yd³
    Width
    117 in
    Weight
    3611 lb
  • C280-12 - Marine Power Systems
    Power Range
    4640-5096 bhp (3460-3800 bkW)
    Speed Range
    900 rpm
    Emissions
    IMO II
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
    0.98 yd³
    Width
    80.2 in
    Weight
    705.5 lb
  • TRS10 Tiltrotator: 516-6767 - Tilt Rotate Systems

    -

    -
  • P218 - Pulverizers
    Capacity - Concrete Thickness
    26 in
    Width
    24.4 in
    Weight
    3710 lb
  • SW345B, 76 mm (3 in) - Saws
    Length
    85.2 in
    Overall Height
    57.3 in
    Overall Width
    72.8 in
  • CM32E - Electric Power

    -

    -
  • ATC Contactor Based Bypass Isolation Automatic Transfer Switch - Electric Power
    Rating Range
    100 to 1200A
    Transfer Type
    Bypass Isolation
    Switch Type
    Contactor Based
  • 2036 mm (80 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
    0.52 yd³
    Width
    80.2 in
    Weight
    1016.3 lb
  • 1566 mm (62 in) - Fork Accessories

    -

    -
  • 14.8 m³ (19.4 yd³) - Blades
    Capacity
    19.4 yd³
    Width
    193 in
  • 1397 mm (55 in) - Fork Accessories

    -

    -
  • PR184 Manual Angle - Rakes
    Overall Width
    93 in
    Weight
    1025.1 lb
    Overall Length
    64 in
  • 914 mm (36 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
    12 ft³
    Width
    36 in
    Weight
    509.3 lb
  • 1627mm (64in) Ripper - Rippers
    Overall Length
    83.1 in
    Weight
    3558 lb
    Width
    32.2 in
  • 4.4m³ (5.75yd³) Performance Series - Buckets - Loader
    Capacity
    5.75 yd³
    Width
    138 in
    Weight
    6175 lb
  • M 34 DF - Marine Power Systems
    Maximum Rating
    4574 kWe (5724 kVA)
    Minimum Rating
    2934 kWe (3672 kVA)
  • G3512 with FAST RESPONSE - Electric Power
    Fuel Type
    Natural Gas
    Frequency
    60 Hz
    Emissions/Fuel Strategy
    U.S. EPA Certified for Non-Emergency Stationary Genset
  • GSV520 5-Tine, 500-Liter Orange Peel Grapple - Grapples
    Capacity
    0.65 yd³
    Operating Weight
    2749 lb
  • 973K - Track Loaders
    Net Power - ISO 9249/SAE J1349
    275 HP
    Operating Weight
    63900 lb
    Capacity - General Purpose
    4.2 yd³
  • 5.0 m3 (6.5 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
    6.5 yd³
    Width
    119.4 in
    Weight
    4909.7 lb
  • G213 GC Demolition & Sorting Grapple: 587-8652 - Grapples
    Capacity
    0.59 yd³
    Weight
    1526 lb
  • 1576 mm (62 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
    0.47 yd³
    Width
    62 in
    Weight
    407.9 lb
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
    10.3 ft³
    Width
    36 in
    Weight
    363.8 lb
  • 308 CR VAB - Excavators
    Gross Power - ISO 14396
    74.3 HP
    Operating Weight
    20385 lb
  • P318 Primary Pulverizer - Pulverizers

    -
    Width
    790 mm
  • ATC-900 CONTROLLER - Electric Power
    Rating Range
    120 to 600V, single phase and three phase @ 50/60 Hz
    Transfer Type
    Switch application dependent
    Switch Type
    Switch application dependent
  • 11.5m³ (15yd³) - Buckets - Loader
    Capacity
    15 yd³
    Width
    162 in
    Weight
    13030 lb
  • 938M - Wheel Loaders
    Rated Net Power
    182 HP
    Operating Weight
    35778 lb
    Bucket Capacities
    2.5-5.0 m3 (3.2-6.5 yd3)
  • B8 - Hammers

    -

    -
  • DE110 GC (60 Hz) - Electric Power
    Minimum Rating
    100 ekW
    Maximum Rating
    100 ekW
    Emissions/Fuel Strategy
    Non Regulated
  • H130 GC S - Hammers
    Impact Energy Class
    4425 ft-lb
    Blows per Minute
    350-700
    Maximum Operating Weight
    5471.4 lb
  • 4121mm (162in) Mat'l Handling Arm, Fusion™ - Material Handling
    Maximum Load Rating
    19000 lb
    Retracted Length
    99 in
    Extended Length
    162 in
  • TH357D Ag Handler

    -

    -
  • TRS14 Tiltrotator: 567-0390 - Tilt Rotate Systems

    -

    -
  • 3.66 m (12 ft) - Snow Pushes
    Weight
    1347 lb
    Overall Height
    39.1 in
    Working Width
    144 in
  • 8.6m (11.2)yd General Duty - Buckets - Mining Shovels

    -

    -
  • CW16 11-Wheel - Compactors
    Gross Power
    100.5 HP
    Operating Weight - 11 Wheel Base Machine
    11685 lb
    11 Wheel Compaction Width with Bias Tire
    84 in
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
    8.5 yd³
    Width
    30 in
    Weight
    321.9 lb
  • 980 2-wedge - Couplers - Loader
    Width
    56.8 in
    Height
    33.1 in
    Weight
    2205 lb
  • CP74B - Compactors
    Gross Power
    173.7 HP
    Operating Weight - With Cab
    36048 lb
    Compaction Width
    84 in
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
    17 yd³
    Width
    203 in
    Weight
    38320 lb
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
    1.9 ft³
    Width
    23.6 in
    Weight
    100.1 lb
  • D6 - Dozers
    Power - Net
    215 HP
    Operating Weight
    50733 lb
  • G324 WH Demolition & Sorting Grapple: 587-8986 - Grapples
    Capacity
    2.35 yd³
    Weight
    4639 lb
  • CP54B - Compactors
    Gross Power
    131 HP
    Operating Weight - With Cab
    24539 lb
    Compaction Width
    84 in
  • HM208 - Mulchers
    Overall Width
    40.4 in
    Weight
    1080.3 lb
    Required Hydraulics
    Standard Flow
  • C7.1 - Industrial
    Maximum Power
    275 HP
    Rated Speed
    2200-2500 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    524 kg (1155 lb)
  • MP332 Shear Jaw - Multi-Processors
    Length
    63.6 in
    Height
    39.6 in
    Width
    84.5 in
  • 14.5m³ (19yd³) - Buckets - Loader
    Capacity
    19 yd³
    Width
    200 in
    Weight
    31260 lb
  • C2.2 - Industrial
    Maximum Power
    66 HP
    Rated Speed
    2200-3000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    184-194 kg (406-427.7 lb)
  • 45.9 m³ (60.0 yd³) - Blades
    Capacity
    60 yd³
    Width
    215 in
  • D6 XE - Dozers
    Power - Net
    215 HP
    Operating Weight
    51333 lb
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
    0.44 yd³
    Width
    62 in
    Weight
    451.9 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
    2782.2 lb
    Overall Height
    44.4 in
    Working Width
    144 in
  • CW-10 - Couplers - Excavator
    Weight
    143 lb
    Width
    12.4 in
    Load Rating, Hoisting Hook
    4.4 ton (US)
  • M 32 E - Marine Power Systems
    Power Range
    3300 - 4950 kW
    Speed Range
    720-750 rpm
    Emissions
    IMO II / IMO III with SCR
  • H115 GC S - Hammers
    Impact Energy Class
    2212 ft-lb
    Blows per Minute
    450-800
    Maximum Operating Weight
    2928.2 lb
  • 1220 mm (48 in) - Forks
    Fork Tine Length
    48 in
    Fork Tine Thickness
    2 in
    Fork Tine Weight
    75 lb
  • 23.32 m³ (30.5 yd³) - Blades
    Capacity
    30.5 yd³
    Width
    194 in
  • C32 ACERT Tier 3 - Marine Power Systems
    Maximum Rating
    940 ekW (1175 kVA)
    Minimum Rating
    730 ekW (913 kVA)
    Frequency
    60hz
  • 301.7D CR - Excavators
    Gross Power - ISO 14396
    24.3 HP
    Operating Weight
    3726 lb
  • 305.5E2 CR - Excavators
    Gross Power - ISO 14396
    45.7 HP
    Operating Weight
    11958 lb
  • 299D3 - Skid Steer Loaders
    Gross Power - SAE J1995
    98 HP
    Operating Weight
    11464 lb
  • 229 mm (9 in) - Augers
    Diameter
    9 in
    Weight
    72.8 lb
    Overall Length
    48 in