O novo Cat D2 oferece desempenho superior e a mais ampla escolha de recursos tecnológicos para ajudá-lo a obter o máximo de seu trator. Ágil e responsivo, tem poder para empurrar e precisão para nivelamento. A transmissão totalmente hidrostática oferece aceleração perfeita, para que você possa fazer o trabalho rapidamente. O sistema de deteção de carga otimiza automaticamente a velocidade de deslocamento com base na carga, para maior produtividade e eficiência de combustível.
| Operating Weight | 8338 kg |
|---|---|
| Operating Weight – LGP | 8648 kg |
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Power – Net | 68.8 kW |
|---|---|
| Engine Model | Cat® C3.6 |
| Displacement | 3.6 l |
| Net Power – 2,200 rpm – ISO 9249/EEC 80/1269 | 68.8 kW |
| Net Power – 2,200 rpm – SAE J1349 | 68.8 kW |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Operating Weight | 8338 kg |
|---|
| Drive Pumps | 1 |
|---|---|
| Maximum Travel Speed – Forward | 9 km/h |
| Maximum Travel Speed – Reverse | 10 km/h |
| Relief Valve Settings | 48500 kPa |
| Track Motors | 2 |
| Pump Output | 65 l/min |
|---|---|
| Relief Valve Settings | 20600 kPa |
| Weight | 610 kg |
|---|---|
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Speed | Variable |
| Drum Capacity – Optional Cable | 78 m |
| Drum Capacity – Recommended Cable | 113 m |
| Drum Diameter | 254 mm |
| Drum Width | 274 mm |
| Maximum Line Pull – Bare Drum | 18144 kg |
| Maximum Line Pull – Full Drum | 11340 kg |
| Maximum Line Speed – Bare Drum | 40 m/min |
| Maximum Line Speed – Full Drum | 63 m/min |
| Overall Width | 741 mm |
| Rope Diameter – Optional | 19 mm |
| Rope Diameter – Recommended | 16 mm |
| Throat Clearance | 171.5 mm |
| Winch Length | 705 mm |
| Track Gauge | 1550 mm |
|---|---|
| Ground Pressure – LGP | 29.7 kPa |
| Length – Track on Ground – LGP | 2248 mm |
| Number of Rollers – Each Side | 7 |
| Number of Shoes – Each Side – Sealed and Lubricated Track (SALT) Undercarriage | 43 |
| Shoe Width – LGP | 635 mm |
| Shoe Width – Standard | 460 mm |
| Track Gauge – LGP | 1725 mm |
| Type | Parallelogram |
|---|---|
| Number of Shanks | 3 |
| Height | 165 mm |
| Weight | 554 kg |
| Maximum Digging Depth | 337.5 mm |
| Maximum Ground Clearance Under Tip | 448 mm |
| Maximum Reach – Ground Line | 766 mm |
| Overall Width | 1710 mm |
| Note | Abrasion Undercarriage |
|---|---|
| BLADE: Blade Capacity (SAE) – LGP | 1.85 m³ |
| BLADE: Blade Cutting Edge Angle, Adjustable – LGP | 52° to 58° |
| BLADE: Blade Height – LGP | 910 mm |
| BLADE: Blade Lift Height – LGP | 708 mm |
| BLADE: Blade Width – LGP | 3149 mm |
| BLADE: Blade Width at Maximum Angle – LGP | 2874 mm |
| BLADE: Digging Depth – LGP | 589 mm |
| BLADE: Maximum Angle (either side) – LGP | 25° |
| BLADE: Maximum Tilt – LGP | 438 mm |
| Dozer Height – LGP | 2765 mm |
| Dozer Height – Standard | 2765 mm |
| Ground Clearance – LGP | 332 mm |
| Length of Basic Dozer (without blade) – LGP | 3290 mm |
| Length of Basic Dozer (without blade) – Standard | 3290 mm |
| Overall Length – With Blade – LGP | 4272 mm |
| Track Gauge – LGP | 1725 mm |
| Width of Dozer (standard shoes, no blade) – LGP | 2360 mm |
| Width of Dozer (standard shoes, no blade) – Standard | 2010 mm |
| Fuel Tank | 195 l |
|---|---|
| Cooling System | 19 l |
| Crankcase – With Filter | 10.5 l |
| Diesel Exhaust Fluid (DEF) Tank | 19 l |
| Final Drive – Each – LGP | 10 l |
| Transmission – Hydraulic Tank | 90 l |
| ROPS | ISO 3471:2008 |
|---|---|
| FOPS | ISO 3449:2005 Level II |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
|---|
| BLADE: Blade Capacity (SAE) – Standard | 1.98 m³ |
|---|---|
| BLADE: Blade Cutting Edge Angle, Adjustable – Standard | 52° to 58° |
| BLADE: Blade Height – Standard | 1010 mm |
| BLADE: Blade Lift Height – Standard | 743 mm |
| BLADE: Blade Width – Standard | 2782 mm |
| BLADE: Blade Width at Maximum Angle – Standard | 2542 mm |
| BLADE: Digging Depth – Standard | 593 mm |
| BLADE: Maximum Angle (either side) – Standard | 25° |
| BLADE: Maximum Tilt – Standard | 387 mm |
| Ground Clearance – Standard | 332 mm |
| Note | With Ripper Attachment (add to Length of Basic Dozer) – 1177 mm (46.3 in) |
| Overall Length – With Blade – Standard | 4281 mm |
| Track Gauge – Standard | 1550 mm |
| Power Train | Hydrostatic |
|---|
| Final Drives – Each Side | 10 l |
|---|
| Ground Pressure | 39.5 kPa |
|---|---|
| Length of Track on Ground | 2248 mm |
| Number of Shoes – Each Side – Abrasion Undercarriage | 38 |
| Control | Hydraulic |
|---|---|
| Drum capacity – optional | 78 m |
| Drum capacity – recommended cable | 113 m |
| Drum diameter | 254 mm |
| Drum width | 274 mm |
| Maximum line pull – bare drum | 18144 kg |
| Maximum line pull – full drum | 11340 kg |
| Maximum line speed – bare drum | 40 m/min |
| Maximum line speed – full drum | 63 m/min |
| Overall width | 741 mm |
| Rope diameter – optional | 19 mm |
| Rope diameter – recommended | 16 mm |
| Speed | Variable |
| Throat clearance | 171.5 mm |
| Weight | 610 kg |
| Winch drive | Hydrostatic |
| Winch length | 705 mm |
| Control | Hydraulic |
|---|---|
| Drum Capacity – Optional Cable | 59 m |
| Drum Capacity – Recommended Cable | 84 m |
| Drum Diameter | 203.2 mm |
| Drum Width | 245 mm |
| Maximum Line Pull – Bare Drum | 14583 kg |
| Maximum Line Pull – Full Drum | 9231 kg |
| Maximum Line Speed – Bare Drum | 15 m/min |
| Maximum Line Speed – Full Drum | 24 m/min |
| Overall width | 709 mm |
| Rope Diameter – Optional | 19 mm |
| Rope Diameter – Recommended | 16 mm |
| Speed | Variable |
| Throat Clearance | 141.4 mm |
| Weight | 794 kg |
| Winch Drive | Hydraulic |
| Winch Length | 905 mm |
Horário de Funcionamento:
2ªfeira a 3ªfeira:
09:00-13:00 | 14:00-17:30
4ªfeira a 6ªfeira:
08:30-13:00 | 14:00-17:30
Horário de Recolhas de material em armazém:
2ªfeira a 6ªfeira: 07:30-19:30
Subscreva a nossa newsletter
© Copyright 2025. All rights reserved. Design by Madde.
