fbpx

Camião Articulado 725

The Cat® 725 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, automatic retarder control, stability-assist machine rollover warning system, and a fuel saving ECO mode.

Engine Model Cat C9.3
Net Power - ISO 14396 252 kW
Bore 115 mm
Stroke 1149 mm
Displacement 9.3 l
Emissions The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C9.3
Gross Power - SAE J1995 255 kW
Net Power - SAE J1349 249 kW
No Engine De-rating Below 914 m
Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (SAE J1995) 1729 N·m
Peak Engine Torque Net (SAE J1349) 1712 N·m
Peak Engine Torque Speed 1200 r/min
Note (3) Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.

Rated Payload 24 t

Heaped (SAE 2:1) 15 m³
Struck 11 m³
Tailgate Heaped SAE 2:1 15.6 m³
Tailgate Struck 11.1 m³

Final Drive - Each 7.5 l
Final Drives/Differential 125 l
Output Transfer Gear Box 24 l
DEF Tank 20 l
Fuel Tank 412 l
Cooling System 83 l
Transmission 47 l
Engine Crankcase 38 l
Hydraulic System 110 l
Steering/Hoist Hydraulic System 110 l

Forward - 1 8.1 km/h
Forward - 2 15.2 km/h
Forward - 3 23.2 km/h
Forward - 4 35.5 km/h
Reverse - 1 8.9 km/h
Forward - 6 58.4 km/h
Forward - 5 49.4 km/h

Interior Cab 69 dB(A)
Note (1) The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Raise Time 10 s
Lower Time 8 s

Type High strength Brinell HB450 wear resistant steel

Base Plate 13 mm
Front Plate 7 mm
Side Plates 11 mm

Center Axle - Empty 4646 kg
Center Axle - Loaded 15397 kg
Center Axle - Rated Load 10750 kg
Front Axle - Empty 14050 kg
Front Axle - Loaded 16549 kg
Front Axle - Rated Load 2500 kg
Rear Axle - Empty 4426 kg
Rear Axle - Loaded 15176 kg
Rear Axle - Rated Load 10750 kg
Total - Empty 23122 kg
Total - Loaded 47122 kg
Total - Rated Load 24000 kg

Hydraulic Excavators: 336F/336F XE - Passes 5-6
Hydraulic Excavators: 349F/349F XE - Passes 4-5
Wheel Loader: 950M - Passes 5
Wheel Loader: 962M - Passes 4-5
Wheel Loaders: 966M/966M XE - Passes 4
Wheel Loaders: 972M/972M XE - Passes 3-4

Steering ISO 5010 – 2007
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2008
Cab - ROPS ISO 3471 – 2008

Lock to Lock 4.75 seconds @ 60 rpm

Note Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Aisle Width 5332 mm
Turning Dimensions - Clearance Radius 8075 mm
Turning Dimensions - Inside Radius 3879 mm
Turning Dimensions - SAE Turning Radius 7470 mm
Turning Dimensions - Steer Angle - Left/Right 45°

Pedir cotação

Usados

SOLUÇÕES QUE SIMPLIFICAM

Sites
STET