Cat | 950 Wheel Loader | Caterpillar
The Cat 950 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering consistent high bucket fill factors resulting in increased productivity. Extended service intervals lower maintenance costs. This machine is designed to meet emission standards without interrupting operation.Improved performance, reliability, durability, and versatility result in a machine that is built to meet your needs.
| Peso Operacional | 19260 kg |
|---|---|
| Observação | Weight based on a machine configuration with with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, secondary steering, sound suppression, and a 3.1 m³ (4.1 yd³) general purpose bucket with BOCE. |
| Implement System - Maximum Pump Output at 2,340 rpm | 322 l/min |
|---|
| Operator Sound Pressure Level - ISO 6396:2008 | 70 dB(A) |
|---|---|
| Exterior Sound Power Level - ISO 6395:2008 | 70 dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69 dB(A) |
| Exterior Sound Power Level - ISO 6395:2008 ¹ | 107 dB(A) |
| Maximum Gross Power - 2,100 rpm - SAE J1995 | 188 kW |
|---|---|
| Engine Torque @ 1,300 rpm - ISO 14396:2002 | 1231 N·m |
| Gross Torque @ 1,300 rpm - SAE J1995:2014 | 1242 N·m |
| Maximum Net Torque - 1,300 rpm - ISO 9249 | 1170 N·m |
| Modelo do Motor | Cat C7.1 |
|---|---|
| Deslocamento | 7 l |
| Observação | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Observação (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Observação (2) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lowercarbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. |
| Potência Líquida Máxima - 2.100 rpm - ISO 9249 | 172 kW |
| Potência Máxima - 2.100 rpm - ISO 14396 | 186 kW |
| Rack Back - Maximum Lift | 56 ° |
|---|---|
| Rack Back - Carry Height | 49 ° |
| Width over Tires (Loaded) | 2824 mm |
| Rack Back - Maximum Lift | 59 ° |
|---|---|
| Rack Back - Carry Height | 49 ° |
| Width over Tires (Loaded) | 2824 mm |
| Avanço - 1 | 6.9 km/h |
|---|---|
| Avanço - 2 | 12 km/h |
| Avanço - 3 | 19.3 km/h |
| Avanço - 4 | 25.7 km/h |
| Ré - 1 | 6.9 km/h |
| Ré - 2 | 12 km/h |
| Ré - 3 | 25.7 km/h |
| Avanço - 5 | 39.5 km/h |
| Observação | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius |
| Força de Desagregação | 181 kN |
|---|---|
| Observação (1) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Service Refill Capaciti |
| Carga de Tombamento Estática - Giro Total de 40° - Sem Deflexão do Pneu | 11961 kg |
| Carga de Tombamento Estática - Giro Total de 40° - Com Deflexão do Pneu | 11201 kg |
| Tanque de DEF | 15 l |
|---|---|
| Tanque de Combustível | 259.5 l |
| Sistema de Arrefecimento | 54 l |
| Transmissão | 43 l |
| Diferencial - Comandos Finais - Frontal | 43 l |
| Diferenciais - Comandos Finais - Traseiros | 43 l |
| Cárter | 21 l |
| Reservatório Hidráulico | 97 l |
| Sistema do Implemento - Pressão de Operação Máxima | 29300 kPa |
|---|---|
| Tempo de Ciclo Hidráulico - Total | 9.1 s |
| Vão Livre Sobre o Solo | 354 mm |
|---|---|
| Altura - Parte Superior do Capô | 2695 mm |
| Altura – Topo da ROPS | 3456 mm |
| Altura do Pino de Articulação em Levantamento Máximo | 4514 mm |
| Folga do Braço de Levantamento em Levantamento Máximo | 3615 mm |
| Comprimento Total - Sem Caçamba | 7490 mm |
| Largura do Piso | 2140 mm |
| Distância entre Eixos | 3350 mm |
| Altura do Pino de Articulação na Altura de Transporte | 775 mm |
| Observação | All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Vão Livre Sobre o Solo | 354 mm |
|---|---|
| Altura - Parte Superior do Capô | 2695 mm |
| Altura do Pino de Articulação na Altura de Transporte | 623 mm |
| Observação | All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Altura – Topo da ROPS | 3456 mm |
| Altura do Pino de Articulação em Levantamento Máximo | 4009 mm |
| Folga do Braço de Levantamento em Levantamento Máximo | 3255 mm |
| Comprimento Total - Sem Caçamba | 7024 mm |
| Largura do Piso | 2140 mm |
| Distância entre Eixos | 3350 mm |
| Observação | For a machine configuration as defined under “Weight.” |
|---|
| Observação | ¹Including countries that adopt the EU and UK Directives. |
|---|---|
| Observação (1) | ¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701 |
| Ar-condicionado | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
|---|
Pedir cotação
Usados
