fbpx

Pá de Rodas 914

A Pá de Rodas Compacta Cat® 914 apresenta um motor C3.6, a articulação da estrutura em Z Otimizada Cat, várias ferramentas de trabalho, um sistema eletro-hidráulico de última geração, um sistema de transmissão ajustado, uma cabine com visibilidade, intervalos de manutenção estendidos e excelente acesso para manutenção e recursos padrão de economia de combustível.

Potência Bruta Máxima 82 kW
Modelo do Motor Cat C3.6
Torque Bruto Máximo - ISO 14396 450 N·m
Diâmetro Interno 98 mm
Curso 120 mm
Deslocamento 3.6 l
Emissões Engine meets Tier 4 Final/Stage V emission standards.
Observação Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Potência Bruta Máxima - ISO 14396 82 kW

Peso Operacional 8668 kg

Capacidades da Caçamba 1.3-1.9 m3 (1.7-2.5 yd3)

Maximum Gross Power - Rated Engine Speed 1800 r/min
Rated Net Power - Rated Engine Speed 2200 r/min
Maximum Gross Power - ISO 14396 (metric) 112 HP
Rated Net Power - SAE J1349 74 kW
Rated Net Power - ISO 9249 73 kW
Maximum Gross Torque - SAE J1995 454 N·m
Maximum Net Torque - SAE J1349 446 N·m
Maximum Net Torque - ISO 9249 443 N·m

Frontal Fixed; Locking differential (standard)
Traseiro Oscillating ±11 degrees; Locking differential (Standard)

Tanque de Combustível 165 l
Sistema de Arrefecimento 21.5 l
Transmissão 3.2 l
Observação DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cárter do Motor 10 l
Reservatório Hidráulico 55 l
Sistema Hidráulico - Incluindo Tanque 98 l
Tanque de Fluido de Escape Diesel (DEF) 18 l

ROPS ISO 3471:2008
FOPS ISO 3449:2005
Observação (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Observação (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)

Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.

Fluxo Máximo - Bomba de Direção 82 l/min
Pressão Máxima de Trabalho - Bomba de Direção 22500 kPa

Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s
Hydraulic Cycle Time - Rackback 2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 120 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 90 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa

Observação (1) Other tire choices are available. Contact your Cat dealer for details.
Observação (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Observação (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Axles - Front Center Differential 7.5 l
Axles - Rear Center Differential 7.5 l

Fluxo Máximo - Bomba do Implemento 148 l/min
Pressão de Alívio - Cilindro de Inclinação 34000 kPa
Pressão de Alívio - Cilindro de Inclinação - Pressão Máxima de Trabalho de 3ª Função 21000 kPa
Pressão Máxima de Trabalho - Bomba do Implemento 28000 kPa

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
Steering Articulation Angle - Each Direction 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s

Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size 17.5 R25 L2 XTLA

Observação *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse - Speed Range 1* 10 km/h
Forward and Reverse - Speed Range 2* 20 km/h
Forward and Reverse - Speed Range 3 40 km/h

Capacidade de Reciclagem 95%

Pedir cotação

Usados

SOLUÇÕES QUE SIMPLIFICAM

(Grátis) 800 206 707

Sites
STET