Motoniveladora 140 GC / 140 GC AWD
The Cat® 140 GC motor grader is easy to own and operate. It’s easy on your wallet too. A demand fan and standard ECO mode reduces fuel consumption while open access to maintenance points makes service quick and simple. Control the blade with consistent movement using lever controls from the comfort of the all new cab. Not all features available in all regions. Consult your Cat dealer for specific configurations available in your region.
Engine Power (ISO 14396) | 147 kW |
---|---|
Engine Model | Cat 7.1 |
Engine RPM | 2,200 |
Maximum Torque - ISO 9249 | 835 N·m |
Torque Rise - ISO 9294 | 40% |
Bore | 105 mm |
Stroke | 135 mm |
Displacement | 7.01 l |
Emissions | U.S. EPA Tier 4 Final/EU Stage V |
Engine Power AWD (ISO 14396) | 147 kW |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
Note (2) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Number of Cylinders | 6 |
Standard Capability | 43 °C |
Derating Altitude | 3000 m |
High - Ambient Capability | 50 °C |
Note (3) | Power as declared per ISO 14396 |
Weight (Stage V)* | 17650 kg |
---|---|
All-Wheel Drive Weight (AWD) (Stage V)* | 18390 kg |
All-wheel Drive Weight (AWD) (Tier 4 Final)** | 19105 kg |
Weight (Tier 4 Final)** | 18365 kg |
Blade Width | 3.7 m |
---|---|
End Bit | 152 mm |
Arc Radius | 413 mm |
Throat Clearance | 112 mm |
Blade Height | 610 mm |
Cutting Edge Width | 152 mm |
Note | * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
---|
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
---|
Maximum Height | 3363 mm |
---|---|
Width All Wheel Drive (AWD) | 2523 mm |
Length of Machine* | 10322 mm |
Width | 2428 mm |
Note | *Typically equipped with push block and ripper. |
Circle Center Shift Left | 752 mm |
---|---|
Circle Center Shift Right | 728 mm |
Maximum Shoulder Reach Left | 1886 mm |
Maximum Shoulder Reach Right | 1812 mm |
Moldboard Side Shift Left | 649 mm |
Moldboard Side Shift Right | 526 mm |
Blade Tip Range Backward | 5 |
Blade Tip Range Forward | 40 |
Maximum Depth of Cut | 715 mm |
Maximum Lift Above Ground | 475 mm |
Circle Drive with Slip Clutch | 7.5 l |
---|---|
Circle Drive without Slip Clutch | 2 l |
Fuel Tank | 295 l |
Cooling System | 10.6 gal (US) |
Transmission | 18 l |
Diesel Exhaust Fluid Tank (Tier 4 Only) | 16 l |
Engine Crankcase | 21 l |
Hydraulic System | 45 l |