fbpx

Trator de Rastos D3

O novo Cat D3 oferece desempenho superior e a mais ampla escolha de recursos tecnológicos para ajudá-lo a obter o máximo de seu trator. Ágil e responsivo, tem poder para empurrar e precisão para nivelamento. A transmissão totalmente hidrostática oferece aceleração perfeita, para que você possa fazer o trabalho rapidamente. O sistema de deteção de carga otimiza automaticamente a velocidade de deslocamento com base na carga, para maior produtividade e eficiência de combustível.

Operating Weight 9362 kg
Operating Weight - LGP 9693 kg
Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2) For machine with ripper, add 554 kg (1,222 lb).
Operating Weight - LGP, 762 mm/30 in 9893 kg

Power - Net 77.6 kW
Engine Model Cat® C3.6
Displacement 3.6 l
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 77.6 kW
Net Power - 2,200 rpm - SAE J1349 77.6 kW
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Operating Weight 9362 kg

Drive Pumps 1
Maximum Travel Speed - Forward 9 km/h
Maximum Travel Speed - Reverse 10 km/h
Relief Valve Settings 48500 kPa
Track Motors 2

Pump Output 65 l/min
Relief Valve Settings 20600 kPa

Weight 610 kg
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Drum Capacity - Optional Cable 78 m
Drum Capacity - Recommended Cable 113 m
Drum Diameter 254 mm
Drum Width 274 mm
Maximum Line Pull - Bare Drum 18144 kg
Maximum Line Pull - Full Drum 11340 kg
Maximum Line Speed - Bare Drum 40 m/min
Maximum Line Speed - Full Drum 63 m/min
Overall Width 741 mm
Rope Diameter - Optional 19 mm
Rope Diameter - Recommended 16 mm
Throat Clearance 171.5 mm
Winch Length 705 mm

Track Gauge 1600 mm
Ground Pressure - LGP 31.2 kPa
Ground Pressure - LGP, 762 mm (30 in) 27.2 kPa
Length - Track on Ground - LGP 2310 mm
Length - Track on Ground - LGP, 762 mm (30 in) 2310 mm
Number of Rollers - Each Side 7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40
Shoe Width - LGP 660 mm
Shoe Width - LGP, 762 mm (30 in) 762 mm
Shoe Width - Standard 510 mm
Track Gauge - LGP 1750 mm
Track Gauge - LGP, 762 mm (30 in) 1860 mm

Type Parallelogram
Number of Shanks 3
Height 165 mm
Weight 554 kg
Maximum Digging Depth 337.5 mm
Maximum Ground Clearance Under Tip 448 mm
Maximum Reach - Ground Line 766 mm
Overall Width 1710 mm

Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Blade Capacity (SAE) - LGP 2.34 m³
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Blade Height - LGP 1010 mm
BLADE: Blade Lift Height - LGP 767 mm
BLADE: Blade Width - LGP 3220 mm
BLADE: Blade Width at Maximum Angle - LGP 2940 mm
BLADE: Digging Depth - LGP 590 mm
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Maximum Tilt - LGP 448 mm
Dozer Height - LGP 2769 mm
Dozer Height - LGP, 762 mm (30 in) 2769 mm
Dozer Height - Standard 2769 mm
Ground Clearance - LGP 332 mm
Ground Clearance - LGP, 762 mm (30 in) 332 mm
Length of Basic Dozer (without blade) - LGP 3270 mm
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 3270 mm
Length of Basic Dozer (without blade) - Standard 3270 mm
Overall Length - With Blade - LGP 4309 mm
Overall Length - With Blade - LGP, 762 mm (30 in) 4309 mm
Track Gauge - LGP 1750 mm
Track Gauge - LGP, 762 mm (30 in) 1860 mm
Width of Dozer (standard shoes, no blade) - LGP 2360 mm
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 2630 mm
Width of Dozer (standard shoes, no blade) - Standard 2110 mm

Fuel Tank 195 l
Cooling System 19 l
Crankcase - With Filter 10.5 l
Diesel Exhaust Fluid (DEF) Tank 19 l
Final Drive - Each - LGP 10 l
Transmission - Hydraulic Tank 90 l

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

BLADE: Blade Capacity (SAE) - Standard  2.19 m³
BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
BLADE: Blade Height - Standard  1073 mm
BLADE: Blade Lift Height - Standard  767 mm
BLADE: Blade Width - Standard  2782 mm
BLADE: Blade Width at Maximum Angle - Standard  2636 mm
BLADE: Digging Depth - Standard  605 mm
BLADE: Maximum Angle (either side) - Standard  25°
BLADE: Maximum Tilt - Standard  402 mm
Ground Clearance - Standard  332 mm
Note  Abrasion Undercarriage
Overall Length - With Blade - Standard  4337 mm
Track Gauge - Standard  1600 mm

Power Train  Hydrostatic

Final Drives - Each Side  10 l

Ground Pressure  38.9 kPa
Length of Track on Ground  2310 mm
Number of Shoes - Each Side - Abrasion Undercarriage  36

Pedir cotação

Usados

SOLUÇÕES QUE SIMPLIFICAM

(Grátis) 800 206 707

Sites
STET