770G Off-Highway Truck
Cat’s 770 40-ton payload sets the standard for haul performance in construction and quarry industries. We’ve taken the best of our rugged, dependable Off-Highway Truck lineup and integrated it with technologies that help our environment, make operators more productive, and dramatically improve the economics of haul fleets. An optimal pass match for the 770 is the Cat 986K or 988K Wheel Loader or the 374F or 390F Hydraulic Excavators. No matter your business type, the 770 is designed to help you move materials safely and efficiently through every haul.
| Net Power - ISO 9249 | 356 kW |
|---|---|
| Engine Model | Cat® C15 |
| Net Power - ISO 14396 | 379 kW |
| Net Power - 80/1269/EEC | 365 kW |
| Rated Engine Speed | 1700 r/min |
| Bore | 137 mm |
| Stroke | 171 mm |
| Displacement | 15.2 l |
| Emissions | Meets U.S. EPA Tier 4 and EU Stage V emission standards. |
| Gross Power - SAE J1995 | 384 kW |
| Net Power - SAE J1349 | 356 kW |
| Net Torque - SAE J1349 | 2486 N·m |
| Note (1) | Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Note (4) | Meets Japan Small Volume Exemption. |
| Number of Cylinders | 6 |
| Note (3) | No engine derating required up to 3000 m (9,843 ft) altitude. |
| Nominal Payload Class (100%) | 38.2 t |
|---|---|
| Top Speed - Loaded | 73.7 km/h |
| Note (1) | *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. |
| Body Capacity - SAE 2:1 | 25.2 m³ |
| Maximum Allowable Payload (120%)* | 45.8 t |
| Maximum Working Payload (110%) | 42 t |
| Note (2) | Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. |
| Target Payload (100%) | 38.2 t |
| Target Gross Machine Operating Weight | 71214 kg |
|---|---|
| Chassis Weight | 25378 kg |
| Body Weight | 7850 kg |
| Note (1) | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. |
| Note (2) | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. |
| Target Gross Machine Weight | 71214 kg |
| Brake Surface - Front | 1395 cm² |
|---|---|
| Brake Surface - Rear | 40225 cm² |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). |
| Brake Standards | ISO 3450:2011 |
| Steering Standards | ISO 5010:2007 |
|---|---|
| Steer Angle | 40.5 ° |
| Turning Circle - Clearance Diameter | 20.3 m |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). |
| Turning Diameter - Front | 17.6 m |
| Steering System - Including Tank | 87 l |
|---|---|
| Brake/Hoist Hydraulic Tank | 145 l |
| Brake Hoist System | 227 l |
| Torque Converter - Transmission System | 64 l |
| DEF Tank | 21 l |
| Differential - Final Drives | 180 l |
| Steering Tank | 55 l |
| Fuel Tank | 530 l |
| Cooling System | 125 l |
| Crankcase | 64 l |
| Struck | 17.6 m³ |
|---|---|
| Heaped (SAE 2:1)* | 25.2 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980. |
| Struck | 17.6 m³ |
|---|---|
| Heaped (SAE 2:1)* | 25.2 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980. |
| Forward - 1 | 11.9 km/h |
|---|---|
| Forward - 2 | 16.3 km/h |
| Forward - 3 | 22.2 km/h |
| Forward - 4 | 29.8 km/h |
| Forward - 6 | 54.4 km/h |
| Forward - 7 | 73.7 km/h |
| Reverse | 14.2 km/h |
| Forward - 5 | 40.4 km/h |
| Note | Maximum travel speeds with standard 18.00R33 (E4) tires. |
| Front Axle - Empty | 49 % |
|---|---|
| Front Axle - Loaded | 34 % |
| Rear Axle - Empty | 51 % |
| Rear Axle - Loaded | 66 % |
| Planetary Ratio | 4.80:1 |
|---|---|
| Differential Ratio | 1.92:1 |
| Total Reduction Ratio | 9.26:1 |
| Wheel Base | 3960 mm |
|---|---|
| Ground Clearance | 518 mm |
| Height - Top of ROPS | 3857 mm |
| Inside Body Depth - Maximum | 1404 mm |
| Overall Body Length | 8199 mm |
| Inside Body Length | 5635 mm |
| Overall Length | 8796 mm |
| Rear Axle - Tail | 2586 mm |
| Dump Clearance | 506 mm |
| Loading Height - Empty | 3147 mm |
| Overall Height - Body Raised | 8255 mm |
| Operating Width | 4780 mm |
| Centerline Front Tire Width | 3110 mm |
| Engine Guard Clearance | 335 mm |
| Outside Body Width | 3931 mm |
| Inside Body Width | 3627 mm |
| Front Canopy Height | 4114 mm |
| Rear Axle - Clearance | 548 mm |
| Centerline of Rear Dual Tire Width | 2536 mm |
| Overall Tire Width | 3693 mm |
| Pump Flow - High Idle | 448 l/min |
|---|---|
| Relief Valve Setting - Raise | 18950 kPa |
| Relief Valve Setting - Lower | 3450 kPa |
| Body Raise Time - High Idle | 7.5 s |
| Body Lower Time - Float | 10 s |
| Body Power Down - High Idle | 10 s |
| Rear axle - Oscillation | 8.9 ° |
|---|---|
| Empty Loaded Cylinder Stroke Front | 234 mm |
| Empty Loaded Cylinder Stroke Rear | 149 mm |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
|---|---|
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
|---|---|
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). |
| Sound Standards (3) | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. |
| Note (1) | Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
|---|---|
| Note (2) | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. |
| Standard Tire | 18.00R33 (E4) |
Ask Quotation
Usados
