fbpx

914 Compact Wheel Loader

The Cat® 914 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Maximum Gross Power 82 kW
Engine Model Cat C3.6
Maximum Gross Power - Rated Engine Speed 1800 r/min
Rated Net Power - Rated Engine Speed 2200 r/min
Maximum Gross Power - ISO 14396 (metric) 112 HP
Rated Net Power - SAE J1349 74 kW
Rated Net Power - ISO 9249 73 kW
Maximum Gross Torque - SAE J1995 454 N·m
Maximum Gross Torque - ISO 14396 450 N·m
Maximum Net Torque - SAE J1349 446 N·m
Maximum Net Torque - ISO 9249 443 N·m
Bore 98 mm
Stroke 120 mm
Displacement 3.6 l
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Maximum Gross Power - ISO 14396 82 kW
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Operating Weight 8668 kg

Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)

Front Fixed; Locking differential (standard)
Rear Oscillating ±11 degrees; Locking differential (Standard)

Fuel Tank 165 l
Cooling System 21.5 l
Transmission 3.2 l
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential 7.5 l
Axles - Rear Center Differential 7.5 l
Diesel Exhaust Fluid (DEF) Tank 18 l
Engine Crankcase 10 l
Hydraulic System - Including Tank 98 l
Hydraulic Tank 55 l

ROPS ISO 3471:2008
FOPS ISO 3449:2005
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.

Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s
Hydraulic Cycle Time - Rackback 2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s
Maximum Flow - Implement Pump 148 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 120 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 90 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min
Maximum Working Pressure - Implement Pump 28000 kPa
Relief Pressure - Tilt Cylinder 34000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000 kPa
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa

Maximum Flow - Steering Pump 82 l/min
Maximum Working Pressure - Steering Pump 22500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
Steering Articulation Angle - Each Direction 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s

Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size 17.5 R25 L2 XTLA

Forward and Reverse - Speed Range 1* 10 km/h
Forward and Reverse - Speed Range 2* 20 km/h
Forward and Reverse - Speed Range 3 40 km/h
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Recyclability 95%

Ask Quotation

Usados

SOLUTIONS THAT SIMPLIFY

(Free) 800 206 707

STET
Websites