Cat | 950 Wheel Loader | Caterpillar
The Cat 950 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering consistent high bucket fill factors resulting in increased productivity. Extended service intervals lower maintenance costs. This machine is designed to meet emission standards without interrupting operation.Improved performance, reliability, durability, and versatility result in a machine that is built to meet your needs.
Operating Weight | 19260 kg |
---|---|
Note | Weight based on a machine configuration with with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, secondary steering, sound suppression, and a 3.1 m³ (4.1 yd³) general purpose bucket with BOCE. |
Implement System - Maximum Pump Output at 2,340 rpm | 322 l/min |
---|---|
Implement System - Maximum Operating Pressure | 29300 kPa |
Hydraulic Cycle Time - Total | 9.1 s |
Operator Sound Pressure Level - ISO 6396:2008 | 70 dB(A) |
---|---|
Exterior Sound Power Level - ISO 6395:2008 | 70 dB(A) |
Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69 dB(A) |
Exterior Sound Power Level - ISO 6395:2008 ¹ | 107 dB(A) |
Note | ¹Including countries that adopt the EU and UK Directives. |
Note (1) | ¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701 |
Engine Model | Cat C7.1 |
---|---|
Maximum Gross Power - 2,100 rpm - SAE J1995 | 188 kW |
Engine Torque @ 1,300 rpm - ISO 14396:2002 | 1231 N·m |
Gross Torque @ 1,300 rpm - SAE J1995:2014 | 1242 N·m |
Maximum Net Torque - 1,300 rpm - ISO 9249 | 1170 N·m |
Displacement | 7 l |
Maximum Net Power - 2,100 rpm - ISO 9249 | 172 kW |
Maximum Power - 2,100 rpm - ISO 14396 | 186 kW |
Note | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Note (2) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lowercarbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. |
Rack Back - Maximum Lift | 56 ° |
---|---|
Rack Back - Carry Height | 49 ° |
Ground Clearance | 354 mm |
Height - Top of Hood | 2695 mm |
Height - Top of ROPS | 3456 mm |
Hinge Pin Height at Maximum Lift | 4514 mm |
Lift Arm Clearance at Maximum Lift | 3615 mm |
Overall Length - Without Bucket | 7490 mm |
Tread Width | 2140 mm |
Wheel Base | 3350 mm |
Hinge Pin Height at Carry Height | 775 mm |
Note | All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
Width over Tires (Loaded) | 2824 mm |
Rack Back - Maximum Lift | 59 ° |
---|---|
Rack Back - Carry Height | 49 ° |
Ground Clearance | 354 mm |
Height - Top of Hood | 2695 mm |
Hinge Pin Height at Carry Height | 623 mm |
Note | All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
Height - Top of ROPS | 3456 mm |
Hinge Pin Height at Maximum Lift | 4009 mm |
Lift Arm Clearance at Maximum Lift | 3255 mm |
Overall Length - Without Bucket | 7024 mm |
Tread Width | 2140 mm |
Wheel Base | 3350 mm |
Width over Tires (Loaded) | 2824 mm |
Forward - 1 | 6.9 km/h |
---|---|
Forward - 2 | 12 km/h |
Forward - 3 | 19.3 km/h |
Forward - 4 | 25.7 km/h |
Reverse - 1 | 6.9 km/h |
Reverse - 2 | 12 km/h |
Reverse - 3 | 25.7 km/h |
Forward - 5 | 39.5 km/h |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius |
Breakout Force | 181 kN |
---|---|
Note (1) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Service Refill Capaciti |
Static Tipping Load - Full 40° Turn - No Tire Deflection | 11961 kg |
Static Tipping Load - Full 40° Turn - With Tire Deflection | 11201 kg |
Note | For a machine configuration as defined under “Weight.” |
DEF Tank | 15 l |
---|---|
Fuel Tank | 259.5 l |
Cooling System | 54 l |
Transmission | 43 l |
Differential - Final Drives - Front | 43 l |
Differential - Final Drives - Rear | 43 l |
Crankcase | 21 l |
Hydraulic Tank | 97 l |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
---|