120 GC
The Cat® 120 GC motor grader is easy to own and operate. A demand fan and standard ECO mode reduces fuel consumption while open access to maintenance points makes service quick and simple. Control the blade with consistent precision using lever controls from the comfort of the all new cab.
| Weight* | 16100 kg |
|---|---|
| All-Wheel Drive (AWD) Weight | 16500 kg |
| Blade Width | 3.7 m |
|---|---|
| Arc Radius | 413 mm |
| Throat Clearance | 112 mm |
| Blade Height | 580 mm |
| Cutting Edge Width | 152 mm |
| End Bit - Width | 6 mm |
| Engine Model | Cat® C4.4 |
|---|---|
| Torque Rise - ISO 9294 | 21% |
| Bore | 105 mm |
| Stroke | 127 mm |
| Displacement | 4.4 l |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards |
| Engine Power AWD (ISO 14396) | 171 HP |
| Maximum Torque | 738 N·m |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler, and alternator. Power as declared per ISO 14396. |
| Derating Altitude | 3000 m |
| Maximum Height | 3787.8 mm |
|---|---|
| Length of Machine* | 9941 mm |
| Width | 2402 mm |
| Note | *Typically equipped with push block and ripper. |
| Circle Drive with Slip Clutch | 7 l |
|---|---|
| Circle Drive without Slip Clutch | 1.5 l |
| Fuel Tank | 269 l |
| Cooling System | 39 l |
| Transmission | 17 l |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 12 l |
| Engine Crankcase | 7.6 l |
| Hydraulic System | 55 l |
| Maximum Depth of Cut | 775 mm |
|---|---|
| Blade Tip Range - Backward | 5° |
| Blade Tip Range - Forward | 40° |
| Circle Centershift - Left | 656 mm |
| Circle Centershift - Right | 656 mm |
| Maximum Lift Above Ground | 410 mm |
| Moldboard Sideshift - Left | 512 mm |
| Moldboard Sideshift - Right | 663 mm |
| Recyclability | 92% |
|---|
Ask Quotation
Usados
