For complete machine specifications and available configurations, please see your Cat dealer or visit www.cat.com.
973K Track Loader
Save money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Crawler loaders give you reduced ground pressure and better traction so you can start the job earlier and work longer in soft underfoot conditions. Purpose-built Waste Handler, Steel Mill and Low Ground Pressure configurations stand up to the toughest applications. This new generation of Cat® Track Loaders brings you all of this, plus improved performance and fuel efficiency.
For complete machine specifications and available configurations, please see your Cat dealer or visit www.cat.com.
For complete machine specifications and available configurations, please see your Cat dealer or visit www.cat.com.
| Flywheel Power | 205 kW |
|---|---|
| Engine Model | Cat C9.3 |
| Net Power - ISO 9249/SAE J1349 | 205 kW |
| Net Power - ISO 9249/SAE J1349 (DIN) | 278 HP |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final), Korea Tier 4 Final OR China Nonroad Stage III/UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA |
| Note (1) | All nonroad Tier 4 Interim and Final, Stage IIIB, IV and V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
| Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Operating Weight | 28985 kg |
|---|---|
| Operating Weight - Wide Gauge | 32304 kg |
| Operating Weight - Waste Handler | 29175 kg |
| Operating Weight - Steel Mill | 33699 kg |
| Note (1) | Subtract approximately 295 kg / 650 lb for machines not equipped with Tier 4 Final/Stage V emissions reduction technology. |
| Capacity - General Purpose | 3.2 m³ |
|---|---|
| Capacity - Multi-Purpose | 3 m³ |
| Capacity - Performance Series | 3.8 m³ |
| Capacity - Landfill | 4.9 m³ |
| Capacity - Slag | 3 m³ |
| Width - General Purpose | 2974 mm |
| Width - Multi-Purpose | 2946 mm |
| Width - Performance Series | 2982 mm |
| Width - Landfill | 2974 mm |
| Width - Slag | 2846 mm |
| Overall Machine Length* | 7579 mm |
|---|---|
| Machine Height - Top of Cab | 3510 mm |
| Height - Top of Stack | 3069 mm |
| Overall Machine Height - Bucket Fully Raised | 5752 mm |
| Overall Machine Width without Bucket: With Standard Tracks - 550 mm (21.6 in) Shoes | 2710 mm |
| Note | *With General Purpose bucket and heavy duty teeth. |
| Track Gauge | 2160 mm |
|---|---|
| Track Shoe Width - Standard | 550 mm |
| Track Shoe Width - Optional | 675 mm |
| Track Shoe Width - Wide Gauge | 830 mm |
| Track on Ground | 2930 mm |
| Ground Contact Area* - Standard Shoe - 550 mm (21.6 in) | 3.66 m² |
| Ground Contact Area* - Optional Shoe - 675 mm (26.6 in) | 4.49 m² |
| Ground Contact Area* - Wide Gauge - 830 mm (32.7 in) | 5.53 m² |
| Ground Pressure* - Standard Shoe - 550 mm (21.6 in) | 77.6 kPa |
| Ground Pressure* - Optional Shoe - 675 mm (26.6 in) | 64.4 kPa |
| Ground Pressure* - Wide Gauge - 830 mm (32.7 in) | 57.3 kPa |
| Note | *ISO 16754:2008. |
| DEF Tank | 35 l |
|---|---|
| Fuel Tank | 384 l |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. |
|---|
Ask Quotation
Usados
