fbpx

R1700 Underground Mining Loader

Our goal for the redesign of the R1700 was simple; add value, power and performance with safety at its core. With each cycle, the R1700 hauls 20 percent more payload, it loads, climbs, hauls and dumps quicker. It features three engine emission options that can be tailored to your mine’s ventilation requirements. The R1700 is a powerful new tool for mining.

Engine Power - Stage V Engine - ISO 14396:2002 257 kW
Engine Power - VR Engine - ISO 14396:2002 269 kW
Engine Model Cat® C13
Engine Power - Tier 3 Engine - ISO 14396:2002 269 kW
Gross Power - EU Stage V Engine - ISO 14396 257 kW
Gross Power - ISO 14396 269 kW
Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396 269 kW
Gross Power - VR Engine - ISO 14396 269 kW
Note (1) Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard.
Note (2) Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard.
Note (4) No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines.
Note (5) Optional Ventilation Reduction package available.
Note (6) Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (7) Optional engine meeting the Tier 4 Final and Stage V emission standards is also available.
Rated Power: Gross Power - Stage V Engine - ISO 14396 257 kW
Rated Power: Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396 269 kW
Rated Power: Gross Power - VR Engine - ISO 14396 269 kW
Note (3) All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).

Nominal Payload Capacity 15000 kg
Gross Machine Mass - Loaded 62739 kg
Rated Payload 15000 kg
Breakout Force - Lift and Tilt 24190 kg
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 37747 kg
Static Tipping Load - Full Turn - Lift Arms Horizontal 31586 kg
Bucket Capacities 5.7-8.6 m³ (7.5-11.2 yd³)

Note *Calculated weights.
Empty 43177 kg
Empty - Front Axle 17399 kg
Empty - Rear Axle 25778 kg
Loaded 58177 kg
Loaded - Front Axle 41464 kg
Loaded - Rear Axle 16713 kg
Operating Mass + Rated Payload* 58177 kg
Operating Mass + Rated Payload* - Front Axle 41464 kg
Operating Mass + Rated Payload* - Rear Axle 16713 kg
Operating Mass* 43177 kg
Operating Mass* - Front Axle 17399 kg
Operating Mass* - Rear Axle 25778 kg

Reverse - 4 32.5 km/h
Forward - 1 4.9 km/h
Forward - 2 9.2 km/h
Forward - 3 16.4 km/h
Forward - 4 28.8 km/h
Reverse - 1 5.9 km/h
Reverse - 2 10.5 km/h
Reverse - 3 18.7 km/h

Lower, Empty, Float Down 2.9 s
Total Cycle Time 13.2 s
Dump 3.3 s
Raise 6.8 s

Dump Bucket - 5 8 m³
Ejector Bucket 5.8 m³
Bolt Together Bucket 6.8 m³
Bolt Together Bucket (1) 6.8 m³
Bolt Together Bucket (2) 7.5 m³
Dump Bucket - 1 - Standard Bucket 5.7 m³
Dump Bucket - 2 6.1 m³
Dump Bucket - 3 6.6 m³
Dump Bucket - 4 7.5 m³
Dump Bucket - 6 8 m³
Light Material Bucket 8.6 m³
Bucket Capacities 5.7-8.6 m³ (7.5-11.2 yd³)

Outside Clearance Radius 6857 mm
Inner Clearance Radius 3139 mm
Axle Oscillation
Articulation Angle 44°

Fuel System 486 l
DEF Tank 27 l
Front Differential and Final Drive 148 l
Rear Differential and Final Drive 141 l
Transmission 54 l

Tire Size 26.5R25

Cooling System 75 l
Engine Crankcase 37 l
Hydraulic Tank 135 l

Ask Quotation

Usados

SOLUTIONS THAT SIMPLIFY

(Free) 800 206 707

STET
Websites