fbpx

972

The Cat® 972 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering increased productivity. Extended service intervals lower maintenance costs. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.

Engine Power @ 1,600 rpm - ISO 14396:2002 253 kW
Engine Model Cat C9.3B
Gross Power @ 1,600 rpm - SAE J1995:2014 256 kW
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 239 kW
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1785 N·m
Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final, and Japan 2014 emission standards.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Displacement 9.3 L
Engine Torque @ 1,200 rpm – ISO 14396:2002 1864 N·m
Gross Torque @ 1,200 rpm – SAE J1995:2014 1882 N·m
Note (3) Cat engines are compatible with the following renewable, alternative, and bio-fuels* with lower greenhouse gas emission impact: ? Up to B20 biodiesel (FAME) ** ? Up to 100% HVO and GTL renewable fuels * Refer to guidelines for successful application. Please consult your Cat dealer or ?Caterpillar Machine Fluids Recommendations? (SEBU6250) for details. ** For use of higher blends, consult your Cat dealer.

Operating Weight 24890 kg
Note Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, secondary steering, sound suppression,and a 4.8 m³ (6.25 yd³) general purpose bucket with BOCE.

Bucket Range 2.8-14.0 m³ 3.75-18.25 yd³

Reverse - 4 39.5 km/h
Forward - 1 6.7 km/h
Forward - 2 13.4 km/h
Forward - 3 24.1 km/h
Forward - 4 39.5 km/h
Reverse - 1 7.3 km/h
Reverse - 2 14.8 km/h
Reverse - 3 26.6 km/h
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.

With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 108
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 76
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A)
Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives.
Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio.

Breakout Force 196 kN
Note (1) For a machine configuration as defined under Weight.
Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection 35582 lb
Static Tipping Load - Full 40° Turn - With Tire Deflection 16297 kg

DEF Tank 26 l
Fuel Tank 303 l
Cooling System 66 l
Transmission 58.5 l
Differential - Final Drives - Front 57 l
Differential - Final Drives - Rear 57 l
Crankcase 23 l
Hydraulic Tank 114 l

Implement System - Maximum Operating Pressure 31000 kPa
Implement System - Maximum Pump Output at 2,250 rpm 373 l/min
Hydraulic Cycle Time - Total 10.7 seconds

Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

Centerline of Rear Axle to Edge of Counterweight 2458 mm
Centerline of Rear Axle to Hitch 1775 mm
Ground Clearance 424 mm
Height - Top of Exhaust Pipe 3531 mm
Height - Top of Hood 2850 mm
Height - Top of ROPS 3593 mm
Hinge Pin Height at Carry 782 mm
Hinge Pin Height at Maximum Lift 4804 mm
Lift Arm Clearance at Maximum Lift 4183 mm
Overall Length - Without Bucket 8069 mm
Tread Width 2230 mm
Wheel Base 3550 mm
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 71 degrees
Rack Back at Ground 37 degrees
Width over Tires (Loaded) 3012 mm

Centerline of Rear Axle to Edge of Counterweight 2458 mm
Centerline of Rear Axle to Hitch 1775 mm
Ground Clearance 1.4 ft
Height - Top of Exhaust Pipe 11.7 ft
Height - Top of Hood 9.4 ft
Height - Top of ROPS 11 ft
Hinge Pin Height at Carry 682 mm
Hinge Pin Height at Maximum Lift 14.7 ft
Lift Arm Clearance at Maximum Lift 12.7 ft
Overall Length - Without Bucket 25.5 ft
Tread Width 2230 mm
Wheel Base 11.8 ft
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 56 degrees
Rack Back at Ground 39 degrees
Width over Tires (Loaded) 3012 mm

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).

Ask Quotation

Usados

SOLUTIONS THAT SIMPLIFY

(Free) 800 206 707

STET
Websites