966 GC Wheel Loader
The new Cat® 966 GC Wheel Loader is easy to own and operate. It offers low fuel consumption with an on-demand fan, load sensing hydraulics, intuitive controls, and performance series buckets. This machine is built to be just the right machine for a broad range of applications. Great machine performance combined with the low owning and operating costs makes the 966 GC the right choice for your business.
| Engine Power @ 1,600 rpm - ISO 14396:2002 | 239 kW |
|---|---|
| Net Power - ISO 9249 | 218 kW |
| Engine Model | Cat C9.3B |
| Gross Power @ 1,600 rpm - SAE J1995:2014 | 242 kW |
| Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 | 218 kW |
| Engine Torque @ 1,200 rpm - ISO 14396:2002 | 1781 N·m |
| Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 | 1673 N·m |
| Bore - ISO 9249 | 115 mm |
| Stroke | 149 mm |
| Displacement | 9.3 l |
| Note (1) | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, China Nonroad Stage IV, and Japan 2014 (Tier 4 Final) emission standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1799 N·m |
| Note (3) | Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases on a lifecycle basis: • Up to B20 biodiesel (FAME) ** • Up to 100% HVO and GTL renewable fuels |
| Operating Weight* | 21781 kg |
|---|---|
| Note (1) | * For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE. |
| Note (2) | * Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Bucket Capacities | 3.2 - 7.1 m³ (4.25 - 9.25 yd³) |
|---|
| Implement System - Maximum Flow @ 2,275 rpm | 327 l/min |
|---|---|
| Implement System - Maximum Flow 3rd Function | 240 l/min |
| Implement System - Maximum Operating Pressure 3rd Function | 22780 kPa |
| Hydraulic Cycle Time - Raise from Carry Position | 5.7 s |
| Hydraulic Cycle Time - Dump, at Maximum Raise | 1.8 s |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.6 s |
| Implement System - Maximum Operating Pressure | 27900 kPa |
| Hydraulic Cycle Time - Total Cycle Time | 10.1 s |
| Implement Pump Type | Variable Displacement Piston, Load Sensing |
| Rack Back - Maximum Lift | 62 ° |
|---|---|
| Rack Back - Carry | 50 ° |
| Rack Back - Ground | 42 ° |
| Wheel Base | 3550 mm |
| B-Pin Height | 4256 mm |
| Centerline of Rear Axle to Edge of Counterweight | 2453 mm |
| Centerline of Rear Axle to Hitch | 1775 mm |
| Ground Clearance | 455 mm |
| Height - Top of Exhaust Pipe | 3539 mm |
| Height - Top of Hood | 2804 mm |
| Height - Top of ROPS | 3582 mm |
| Lift Arm Clearance | 3705 mm |
| Reverse - 4 | 36.9 km/h |
|---|---|
| Forward - 1 | 6.4 km/h |
| Forward - 2 | 12.1 km/h |
| Forward - 3 | 21 km/h |
| Forward - 4 | 34.8 km/h |
| Reverse - 1 | 7 km/h |
| Reverse - 2 | 13.2 km/h |
| Reverse - 3 | 23 km/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32 in) roll radius. |
| Breakout Force | 164 kN |
|---|---|
| Note (1) | * For 4.0 m3 (5.2 yd3) general purpose bucket with BOCE. |
| Note (2) | * Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 37° Turn - No Tire Deflection | 14642 kg |
| Static Tipping Load - Full 37° Turn - With Tire Deflection | 13640 kg |
| DEF Tank | 26 l |
|---|---|
| Fuel Tank | 320 l |
| Cooling System | 53 l |
| Transmission | 55 l |
| Differential - Final Drives - Front | 57 l |
| Differential - Final Drives - Rear | 57 l |
| Crankcase | 23 l |
| Hydraulic Tank | 101 l |
| Brakes | Brakes meet ISO 3450:2011 standards |
|---|
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
|---|
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
|---|---|
| Note (2) | ** For machines in European Union countries and in countries that adopt the “EU Directives”. |
| Note (3) | *** European Union Directive “2000/14/EC” as amended by “2005/88/EC”. |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 108 dB(A)*** |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | 73 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 110 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 78 dB(A)* |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 75 dB(A) |
| Recyclability | 97% |
|---|
Ask Quotation
Usados
