Cat | 962 Wheel Loader | Caterpillar
The Cat 962 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering consistent high bucket fill factors resulting in increased productivity. Extended service intervals lower maintenance costs. This machine is designed to meet emission standards without interrupting operation. Improved performance, reliability, durability, and versatility result in a machine that is built to meet your needs.
| Operating Weight | 20171 kg |
|---|---|
| Note | Weight based on a machine configuration with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, secondary steering, sound suppression, and a 3.3 m³ (4.3 yd³) general purpose bucket with BOCE. |
| Implement System - Maximum Pump Output at 2,340 rpm | 322 l/min |
|---|---|
| Implement System - Maximum Operating Pressure | 29300 kPa |
| Hydraulic Cycle Time - Total | 9.4 s |
| Operator Sound Pressure Level - ISO 6396:2008 | 70 dB(A) |
|---|---|
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69 dB(A) |
| Note | ¹Operator Sound Pressure Level - Including countries that adopt the EU and UK Directives. |
| Note (1) | ¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701 |
| Engine Model | Cat C7.1 |
|---|---|
| Maximum Gross Power - 2,100 rpm - SAE J1995 | 203 kW |
| Maximum Net Torque - 1,400 rpm - ISO 9249 | 1176 N·m |
| Maximum Gross Power - 2,100 rpm - SAE J1995 - Metric | 277 mhp |
| Maximum Gross Torque - 1,400 rpm | 1245 N·m |
| Maximum Gross Torque - 1,400 rpm - SAE J1995 | 1256 N·m |
| Displacement | 7 l |
| Maximum Net Power - 2,100 rpm - ISO 9249 | 187 kW |
| Maximum Net Power - 2,100 rpm - ISO 9249 - Metric | 255 mhp |
| Maximum Net Power - 2,100 rpm - SAE J1349 | 187 kW |
| Maximum Power - 2,100 rpm - ISO 14396 | 201 kW |
| Maximum Power - 2,100 rpm - ISO 14396 - Metric | 273 kW |
| Note | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards |
| Note (1) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with |
| Rack Back - Maximum Lift | 55 ° |
|---|---|
| Rack Back - Carry Height | 51 ° |
| Ground Clearance | 351 mm |
| Height - Top of Hood | 2692 mm |
| Hinge Pin Height at Carry Height | 674 mm |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Height - Top of ROPS | 3453 mm |
| Hinge Pin Height at Maximum Lift | 4223 mm |
| Lift Arm Clearance at Maximum Lift | 3459 mm |
| Overall Length - Without Bucket | 7263 mm |
| Tread Width | 2140 mm |
| Wheel Base | 3350 mm |
| Width over Tires (Loaded) | 2825 mm |
| Forward - 1 | 6.9 km/h |
|---|---|
| Forward - 2 | 12 km/h |
| Forward - 3 | 19.3 km/h |
| Forward - 4 | 25.7 km/h |
| Reverse - 1 | 6.9 km/h |
| Reverse - 2 | 12 km/h |
| Reverse - 3 | 25.7 km/h |
| Forward - 5 | 39.5 km/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Breakout Force | 189 kN |
|---|---|
| Note (1) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 12487 kg |
| Note | For a machine configuration as defined under “Weight.” |
| Static Tipping Load - Full 37° Turn - With Tire Deflection | 11734 kg |
| DEF Tank | 15 l |
|---|---|
| Fuel Tank | 259.5 l |
| Cooling System | 54 l |
| Transmission | 43 l |
| Differential - Final Drives - Front | 43 l |
| Differential - Final Drives - Rear | 43 l |
| Crankcase | 21 l |
| Hydraulic Tank | 97 l |
| Ground Clearance | 351 mm |
|---|---|
| Height - Top of Hood | 2692 mm |
| Height - Top of ROPS | 3453 mm |
| Hinge Pin Height at Maximum Lift | 4511 mm |
| Lift Arm Clearance at Maximum Lift | 3612 mm |
| Overall Length - Without Bucket | 7657 mm |
| Tread Width | 2140 mm |
| Wheel Base | 3350 mm |
| Hinge Pin Height at Carry Height | 776 mm |
| Note | All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires. |
| Width over Tires (Loaded) | 2825 mm |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
|---|
Ask Quotation
Usados
